Page 1 of 1
Is it necessary to add Ethercat gateway for Revotion Pi to realize Ethercat master?
Posted: 11 May 2020, 08:05
by huanghuapan
Dear sir：
I want to use the core 3 module as the PLC function, combined with the codesys software to realize the Ethercat master station, do we have to add an extended gateway module? Or can the core 3 network port be used for Ethercat communication?
Re: Is it necessary to add Ethercat gateway for Revotion Pi to realize Ethercat master?
Posted: 11 May 2020, 08:15
by pi_admin
huanghuapan wrote: ↑11 May 2020, 08:05
Dear sir：
I want to use the core 3 module as the PLC function, combined with the codesys software to realize the Ethercat master station, do we have to add an extended gateway module? Or can the core 3 network port be used for Ethercat communication?
No need for an extra gateway module. A RevPi Core 3 combined with the codesys software will do the job.
Re: Is it necessary to add Ethercat gateway for Revotion Pi to realize Ethercat master?
Posted: 11 May 2020, 13:06
by huanghuapan
I want to connect the Ethercat slave device, can I use the network port on the core 3 module directly? What about Canopen? But there is no Canopen interface on core 3
Re: Is it necessary to add Ethercat gateway for Revotion Pi to realize Ethercat master?
Posted: 11 May 2020, 13:33
by dirk
Hi, well for EtherCAT on the RevPi Core 3/+ you have the option to use the experimental way with Codesys and the RevPiLib - we just have a fresh
beta available here. Or just use a
RevPi Gate CANopen Slave.
Regarding CANopen have a look at the
RevPi Connect/+ with the
RevPi Con CAN module. There are tutorials available to show you the functionality:
Overview RevPi Con CAN
How to Control RevPi Con CAN
Codesys as CANopen Master