The Industrial Raspberry Pi Forum

Is there a document (or documents) which contains details of what all the LEDs do on RevPi Modules?
I can't seem to find them.

I've worked out these for the DIO module:
--------------------------------------------------------------------------------------------------------------------------------------------------------------
"POWER" LED
Green=Power (from bottom of module) is OK
Red=Power (from bottom of module) is not OK (module will not work)

"OUT" LED
Green=Power (from top left of module) is OK
Red=Power (from top left of module) is not OK (outputs will not work)

"IN" LED
Green=Power (from top right of module) is OK
Red=Power (from top right of module) is not OK (inputs will not work)
--------------------------------------------------------------------------------------------------------------------------------------------------------------
and I have red on the diag LED on a Profinet GW module - can anyone enlighten me as to what it means?
Thanks

Hi MartynSudworth, here are some links to the tutorials and manuals.

• LEDs on the RevPi Core - https://revolution.kunbus.com/tutorials ... evpi-core/
• LEDs for the DIO Module - https://revolution.kunbus.com/tutorials ... io-module/
• GATEWAY Module for PROFINET IRT Articlenumber: 100074
• Have a look at the User Manual which you may download here which contains the description of the LEDs - https://www.kunbus.com/profinet-irt-gateway-module.html
• Module Configuration - https://revolution.kunbus.com/tutorials ... -profinet/