Login after flashing image not possible

[vikramghiye]

Dear Sir,
As per discussion with you i was installed stretch https://revolution.kunbus.de/shop/en/stretch in my RevPi module.
Sir now am not able to get IP address of RevPi module, Is also not visible on IP scanner and not able to connect by using Putty.

[dirk]

Dear vikramghiye, please connect a HDMI monitor and an USB keyboard.
Then try to login using user "pi" password "raspberry" with a geman keymap (QWERTZ).
Here are detailed instructions in the Tutorial How to Save and Install a New Image.

[dirk]

Dear vikramghiye maybe you consider to modify the subject to something like "Login after flashing image not possible" or so...

[qst]

Dear vikramghiye, please connect a HDMI monitor and an USB keyboard.
Then try to login using user "pi" password "raspberry" with a geman keymap (QWERTZ).
Here are detailed instructions in the Tutorial How to Save and Install a New Image.

Hello Dirk,
I am having the same problem. I have connected a keyboard and monitor but still cannot login with pi/raspberry.

Any suggestions?

[dirk]

Hi please try pi/raspberrz

[qst]

Hi please try pi/raspberrz

Thank you, that worked perfectly!