Hi, regarding your question "How does the module work with shielding?": The RevPi Con CAN itself has no shield connection. A shielded cable should be used for CAN, especially for longer lengths. The screen can be contacted in different ways: - When the line enters the control cabinet: http...

Hi Ben, schau Dir das Tutorial an RevPi Connect Module anschließen. Dort ist ein Link zum User Manual des Herstellers des verwendeten Chips.

Hi @RevPiModIO siehe Verlauf. Es geht um die Vernetzung von mehreren Systemen. Kannst Du dazu etwas sagen?

Hi Grontrom, thank you for your positive reply. I have heared about the "Ikea effect. Maybe this was the thing here. Anyway I wish you a successful start with your project.

Hi Tobias, danke für den Hinweis. Es handelt sich um einen bekannten Schönheitsfehler. Wir arbeiten zurzeit an einer Lösung.

Hi no we don't offer such relais. Have a look here for example: https://www.digikey.de/short/zpwrct Then you just switch the relais using a RevPi Core 3/+ or RevPi Connect/+ Module plus a DO or a DIO Module . The difference here is that the RevPi uses a process image rather than GPIOs to switch the ...

Hi Gontron, no problem. Step 1 - The LEDs Power and DO must indicate status Ok with green light. -> Conect X2 plug with 24V and GND -> verify the LED indicate "green" if it doesnt work - check your wiring aganin - run "piTest -x" to restart the picontrol driver - check the pictor...

Hi yes this IS the problem

Hi pleas to check the wiring again. I think you have mixed up your X2 DIO output power with the LED.
- connect the X2 with 24V
- connect the LED with GND and O1

Hi, z.B. dieses hier von MeanWell DR-UPS40 bei Mouser