Log on to the web browser.
- Open your web browser.
- Enter the IP address of your RevPi Flat into the address line in your browser.
- The logon window opens.
- Log on with the username “admin”.
- Enter your password. You will find this on the sticker on the side of your RevPi Flat.
- Click on “Login”.
- The status page opens.
Apps
In the Apps tab you will find some browser applications that you can launch from this page. PiCtory is already activated.
- Click on “Start” to call up PiCtory.
- For other applications such as Node Red you have to start them in “Services” first.
- To do this, go to the “Services” tab.
Services
In this tab you can see the services that are available for your applications. They can be enabled here.
- To enable the applications, click on the checkbox in front of the “Enabled” entry.
- To disable the applications, click on the checkbox in front of the “Disabled” entry.
- After each change, the status “changed” is displayed in the relevant line.
- Click on “Save all” to save the settings. It can take up to 10 seconds for the change to be saved and the status to be updated. A good time to make yourself a coffee or tea.
- If the changes have been saved successfully, the status message “…saved” appears. These settings are saved permanently.
Config
In this tab you can enable or disable various functions.
- To enable the function, click on the checkbox in front of the “Enabled” entry.
- To disable the function, click on the checkbox in front of the “Disabled” entry.
- Click on “Save all” to save the settings. It can take up to 10 seconds for the change to be saved and the status to be updated.
- If the changes have been saved successfully, the status message “…saved” appears. These settings are saved permanently.
Function | Description |
|---|---|
Max CPU clock rate | Select maximum CPU frequency. Depending on the temperature, the CPU clock frequency may be reduced automatically. In order to guarantee consistent system behavior, this can be reduced in advance. |
Enable/Disable time synchronization daemon | Enable/disable time synchronization via the Internet. |
Enable/Disable SSH daemon to prevent remote login | Enable/disable headless access via secure shell host protocol. |
Boot to GUI | Enable/disable automatic start of the graphical user interface. |
SWAP | To limit access to the eMMC permanent memory, the swapping of RAM data to the eMMC can be disabled. |
Store logs on | To limit access to the eMMC permanent memory, logging data can be redirected to a RAM disk (tmpfs). [] tmpfs: Use RAM disk [] eMMS: Use permanent memory |
Enable/Disable built-in Bluetooth | Enable/disable Bluetooth. |
Enable/Disable built-in WLAN | Enable/disable WLAN. |
Status
In this tab you will find device information about your RevPi Flat.
