Modules attached to the RevPi Core/Connect can be found with one click scan and copied to the CODESYS project tree.
- Add the RevPi Core/Connect to the CODESYS tree.
- Load the configuration onto the RevPi device and go ONLINE.
- Right-click on your RevPi Core/Connect.
- Click on “Scan for Devices”.
- Click on “Copy All Devices to Project”
This produces a list of all modules attached on the left or right side of the RevPi Core/Connect.
- The CODESYS project device tree shall be updated
- You can then go OFFLINE.
- Write your required application logic and download the new configuration.