Revolution Pi Family

Meet the Revolution Pi family

Revolution Pi is an open, modular and inexpensive industrial PC based on the well-known Raspberry Pi. Housed in a slim DIN-rail housing, the three available base modules can be seamlessly expanded by a variety of suitable I/O modules and fieldbus gateways. The 24V powered modules are connected via an overhead connector in seconds and can be easily configured via a graphical configuration tool.

No lazy compromises when it comes to industrial suitability

To achieve a real industrial suitability according to EN 611131-2 or IEC 61131-2, the rather unknown Raspberry Pi Compute Module was used as a basis. The module, which looks like a notebook RAM bar, is limited to the essentials and does not have any external interfaces. With the Raspberry Pi Compute Module the foundation has been laid for equipping the Raspberry Pi with a robust and industry-compatible periphery developed by us, which meets all important industrial standards. On the software side, the Revolution Pi has a specially adapted Raspbian operating system, which is equipped with a real-time patch. The use of Raspbian ensures that most of the applications developed for the Raspberry Pi can also be used on the Revolution Pi.

Further information and all technical data on hardware and software can be found on the product pages of the individual modules.

Revolution Pi auseinander gebaut
The base module RevPi Core 3 dismantled into its components. In the middle of the picture you can see the Raspberry Pi Compute module.

Available modules