The Industrial Raspberry Pi Forum

Posted: **27 Aug 2018, 09:15**

Hello,

I think I've spotted a mistake in the DeviceNet gateway documentation (https://revolution.kunbus.com/tutorials ... devicenet/ and https://revolution.kunbus.de/tutorials/ ... rect=de_DE) since the switch configurations for 250kbit/s and 500kbit/s are identical:

: Screenshot from 2018-08-27 09-10-39.png (6.61 KiB) Viewed 4306 times

Best,

Posted: **07 Sep 2018, 08:21**

Hello,

Thank you for your tip we will fix it.

In the meantime, the correct configuration is:

Switch 1: OFF 125 kbit/s
Switch 2: OFF

Switch 1: ON 250 kbit/s
Switch 2: OFF

Switch 1: OFF 500 kbit/s
Switch 2: ON

Switch 1: ON Automatic bit rate detection
Switch 2: ON

The Industrial Raspberry Pi Forum

Mistake in DeviceNet documentation

Mistake in DeviceNet documentation

Re: Mistake in DeviceNet documentation