ich habe hier mehrere Core 3 und den Edimax Wifi Dongle aus dem RevPi Online Shop. In bestehenden Systemen funktioniert der Stick einwandfrei am Core 3. Jetzt habe ich aber das erste mal nicht ein bestehendes Image (in dem das WLAN schon eingerichtet ist) auf einen neuen Core 3 geladen sondern bin mit Werkseinstellungen gestartet. Leider habe ich Probleme das Wifi zum laufen zu bekommen. "ip a" zeigt zwar den WLAN-Stick, aber wenn ich in den Desktop starte und auf die beiden Pfeile rechts oben klicke die sonst die verfügbaren Netzwerke anzeigen, sagt mir das System "No wireless interfaces found". Vielleicht kann hier jemand helfen?
Code: Select all
uname -a
Linux RevPi5775 4.4.50-rt66-v7+ #1 SMP PREEMPT RT Wed, 20 Sep 2017 07:09:15 +0200 armv7l GNU/Linux
Code: Select all
dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.50-rt66-v7+ (admin@kunbus.de) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #1 SMP PREEMPT RT Wed, 20 Sep 2017 07:09:15 +0200
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Raspberry Pi Compute Module 3 Rev 1.0
[ 0.000000] cma: Reserved 8 MiB at 0x3a800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 241664
[ 0.000000] free_area_init_node: node 0, pgdat 808e9540, node_mem_map b9fa6000
[ 0.000000] Normal zone: 2124 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 241664 pages, LIFO batch:31
[ 0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010)
[ 0.000000] [bcm2709_smp_init_cpus] ncores=4
[ 0.000000] PERCPU: Embedded 14 pages/cpu @b9f58000 s24640 r8192 d24512 u57344
[ 0.000000] pcpu-alloc: s24640 r8192 d24512 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540
[ 0.000000] Kernel command line: bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2709.boardrev=0xa220a0 bcm2709.serial=0x19bab64a bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait nosplash plymouth.ignore-serial-consoles smsc95xx.macaddr=c8:3e:a7:00:28:6f
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 938360K/966656K available (6450K kernel code, 436K rwdata, 1772K rodata, 456K init, 787K bss, 20104K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x8080fc20 (8224 kB)
.init : 0x80810000 - 0x80882000 ( 456 kB)
.data : 0x80882000 - 0x808ef2cc ( 437 kB)
.bss : 0x808f2000 - 0x809b6e98 ( 788 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000018] Switching to timer-based delay loop, resolution 52ns
[ 0.000270] Console: colour dummy device 80x30
[ 0.002060] console [tty1] enabled
[ 0.002089] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.002095] pid_max: default: 32768 minimum: 301
[ 0.002195] Security Framework initialized
[ 0.002204] Yama: becoming mindful.
[ 0.002426] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002436] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003469] Disabling cpuset control group subsystem
[ 0.003496] Initializing cgroup subsys io
[ 0.003521] Initializing cgroup subsys memory
[ 0.003562] Initializing cgroup subsys devices
[ 0.003577] Initializing cgroup subsys freezer
[ 0.003591] Initializing cgroup subsys net_cls
[ 0.003698] CPU: Testing write buffer coherency: ok
[ 0.003708] ftrace: allocating 21690 entries in 64 pages
[ 0.060544] CPU0: update cpu_capacity 1024
[ 0.061076] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.061116] [bcm2709_smp_prepare_cpus] enter
[ 0.061279] Setting up static identity map for 0x8240 - 0x8298
[ 0.180120] [bcm2709_boot_secondary] cpu:1 started (0) 17
[ 0.180308] [bcm2709_secondary_init] enter cpu:1
[ 0.180349] CPU1: update cpu_capacity 1024
[ 0.180354] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.220141] [bcm2709_boot_secondary] cpu:2 started (0) 17
[ 0.220304] [bcm2709_secondary_init] enter cpu:2
[ 0.220328] CPU2: update cpu_capacity 1024
[ 0.220333] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.260213] [bcm2709_boot_secondary] cpu:3 started (0) 18
[ 0.260343] [bcm2709_secondary_init] enter cpu:3
[ 0.260365] CPU3: update cpu_capacity 1024
[ 0.260371] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.260461] Brought up 4 CPUs
[ 0.260583] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.260621] CPU: All CPU(s) started in HYP mode.
[ 0.260653] CPU: Virtualization extensions available.
[ 0.261409] devtmpfs: initialized
[ 0.274849] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.275335] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.276217] pinctrl core: initialized pinctrl subsystem
[ 0.276961] NET: Registered protocol family 16
[ 0.282194] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.290208] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.290317] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.290531] Serial: AMBA PL011 UART driver
[ 0.290839] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 0.291615] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.363429] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[ 0.364103] SCSI subsystem initialized
[ 0.364315] usbcore: registered new interface driver usbfs
[ 0.364432] usbcore: registered new interface driver hub
[ 0.364588] usbcore: registered new device driver usb
[ 0.370450] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-04-05 11:49
[ 0.397856] clocksource: Switched to clocksource arch_sys_counter
[ 0.456704] FS-Cache: Loaded
[ 0.457041] CacheFiles: Loaded
[ 0.470613] NET: Registered protocol family 2
[ 0.471669] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.471835] TCP bind hash table entries: 8192 (order: 5, 229376 bytes)
[ 0.472509] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.472658] UDP hash table entries: 512 (order: 3, 32768 bytes)
[ 0.472795] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
[ 0.473226] NET: Registered protocol family 1
[ 0.473623] RPC: Registered named UNIX socket transport module.
[ 0.473664] RPC: Registered udp transport module.
[ 0.473699] RPC: Registered tcp transport module.
[ 0.473733] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.474890] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.476461] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.492093] VFS: Disk quotas dquot_6.6.0
[ 0.492431] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.494978] FS-Cache: Netfs 'nfs' registered for caching
[ 0.496042] NFS: Registering the id_resolver key type
[ 0.496143] Key type id_resolver registered
[ 0.496178] Key type id_legacy registered
[ 0.499054] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.499252] io scheduler noop registered
[ 0.499297] io scheduler deadline registered (default)
[ 0.499636] io scheduler cfq registered
[ 0.503467] BCM2708FB: allocated DMA memory fac10000
[ 0.503602] BCM2708FB: allocated DMA channel 0 @ f3007000
[ 0.554264] Console: switching to colour frame buffer device 228x61
[ 0.584838] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.585104] vc-cma: Videocore CMA driver
[ 0.585227] vc-cma: vc_cma_base = 0x00000000
[ 0.585368] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.585526] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.585914] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ 0.634133] brd: module loaded
[ 0.654429] loop: module loaded
[ 0.655614] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0
[ 0.657508] Loading iSCSI transport class v2.0-870.
[ 0.658499] usbcore: registered new interface driver smsc95xx
[ 0.658720] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.859174] Core Release: 2.80a
[ 0.859286] Setting default values for core params
[ 0.859462] Finished setting default values for core params
[ 1.060109] Using Buffer DMA mode
[ 1.060223] Periodic Transfer Interrupt Enhancement - disabled
[ 1.060397] Multiprocessor Interrupt Enhancement - disabled
[ 1.060565] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.060705] Dedicated Tx FIFOs mode
[ 1.061269] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac04000 dma = 0xfac04000 len=9024
[ 1.061577] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 1.068900] dwc_otg: Microframe scheduler enabled
[ 1.068953] WARN::hcd_init_fiq:415: FIQ on core 1 at 0x8045c6e0
[ 1.068960] WARN::hcd_init_fiq:416: FIQ ASM at 0x8045ca3c length 36
[ 1.068968] WARN::hcd_init_fiq:441: MPHI regs_base at 0xbb87e000
[ 1.069029] dwc_otg 3f980000.usb: DWC OTG Controller
[ 1.096470] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 1.103466] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 1.110281] Init: Port Power? op_state=1
[ 1.116986] Init: Power Port (0)
[ 1.123875] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.130632] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.137427] usb usb1: Product: DWC OTG Controller
[ 1.144284] usb usb1: Manufacturer: Linux 4.4.50-rt66-v7+ dwc_otg_hcd
[ 1.151205] usb usb1: SerialNumber: 3f980000.usb
[ 1.159060] hub 1-0:1.0: USB hub found
[ 1.165784] hub 1-0:1.0: 1 port detected
[ 1.173169] dwc_otg: FIQ enabled
[ 1.173180] dwc_otg: NAK holdoff enabled
[ 1.173189] dwc_otg: FIQ split-transaction FSM enabled
[ 1.173225] Module dwc_common_port init
[ 1.173502] usbcore: registered new interface driver usb-storage
[ 1.180559] mousedev: PS/2 mouse device common for all mice
[ 1.220530] rtc-pcf2127 1-0051: rtc core: registered rtc-pcf2127 as rtc0
[ 1.227247] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 83) (baudrate 100000)
[ 1.235017] bcm2835-cpufreq: min=600000 max=1200000
[ 1.242203] sdhci: Secure Digital Host Controller Interface driver
[ 1.249112] sdhci: Copyright(c) Pierre Ossman
[ 1.256632] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.263554] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 1.308056] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.315497] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.322695] usbcore: registered new interface driver usbhid
[ 1.329592] usbhid: USB HID core driver
[ 1.337159] Initializing XFRM netlink socket
[ 1.344087] NET: Registered protocol family 17
[ 1.350997] mmc0: MAN_BKOPS_EN bit is not set
[ 1.351078] Key type dns_resolver registered
[ 1.351619] Registering SWP/SWPB emulation handler
[ 1.352610] registered taskstats version 1
[ 1.355456] rtc-pcf2127 1-0051: setting system clock to 2018-04-17 07:51:52 UTC (1523951512)
[ 1.355470] of_cfs_init
[ 1.355584] of_cfs_init: OK
[ 1.367993] Indeed it is in host mode hprt0 = 00021501
[ 1.406721] Waiting for root device /dev/mmcblk0p2...
[ 1.408357] mmc0: new high speed MMC card at address 0001
[ 1.420793] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
[ 1.427926] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
[ 1.437001] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
[ 1.446082] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
[ 1.456379] mmcblk0: p1 p2
[ 1.541217] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.547936] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.548129] Indeed it is in host mode hprt0 = 00001101
[ 1.562918] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.570679] devtmpfs: mounted
[ 1.578278] Freeing unused kernel memory: 456K (80810000 - 80882000)
[ 1.741722] random: nonblocking pool is initialized
[ 1.749412] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.757755] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.767543] hub 1-1:1.0: USB hub found
[ 1.776117] hub 1-1:1.0: 5 ports detected
[ 1.911065] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 1.920179] systemd[1]: Detected architecture 'arm'.
[ 2.057940] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.094631] NET: Registered protocol family 10
[ 2.103884] systemd[1]: Inserted module 'ipv6'
[ 2.113038] systemd[1]: Set hostname to <RevPi5775>.
[ 2.199047] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.214807] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.218487] smsc95xx v1.0.4
[ 2.283646] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, c8:3e:a7:00:28:6f
[ 2.377963] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ 2.501911] systemd[1]: Cannot add dependency job for unit regenerate_ssh_host_keys.service, ignoring: Unit regenerate_ssh_host_keys.service failed to load: No such file or directory.
[ 2.514686] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.524000] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.532639] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
[ 2.538010] systemd[1]: Starting Remote File Systems (Pre).
[ 2.549184] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.549195] usb 1-1.2: Product: USB Receiver
[ 2.549202] usb 1-1.2: Manufacturer: Logitech
[ 2.584181] systemd[1]: Reached target Remote File Systems (Pre).
[ 2.592706] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 2.611240] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.619971] systemd[1]: Starting Encrypted Volumes.
[ 2.638024] systemd[1]: Reached target Encrypted Volumes.
[ 2.646641] systemd[1]: Starting Swap.
[ 2.664728] systemd[1]: Reached target Swap.
[ 2.667890] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 2.682164] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-402e4a57\x2d01.device...
[ 2.700689] systemd[1]: Starting Root Slice.
[ 2.719320] systemd[1]: Created slice Root Slice.
[ 2.728166] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.746844] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.755980] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.769519] usb 1-1.3: New USB device found, idVendor=7392, idProduct=7811
[ 2.769530] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.769537] usb 1-1.3: Product: 802.11n WLAN Adapter
[ 2.769544] usb 1-1.3: Manufacturer: Realtek
[ 2.769552] usb 1-1.3: SerialNumber: 00e04c000001
[ 2.819914] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.828794] systemd[1]: Starting Journal Socket (/dev/log).
[ 2.847495] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.856443] systemd[1]: Starting udev Control Socket.
[ 2.875056] systemd[1]: Listening on udev Control Socket.
[ 2.883839] systemd[1]: Starting udev Kernel Socket.
[ 2.901771] systemd[1]: Listening on udev Kernel Socket.
[ 2.910316] systemd[1]: Starting User and Session Slice.
[ 2.928493] systemd[1]: Created slice User and Session Slice.
[ 2.937062] systemd[1]: Starting Journal Socket.
[ 2.955131] systemd[1]: Listening on Journal Socket.
[ 2.963814] systemd[1]: Starting System Slice.
[ 2.981842] systemd[1]: Created slice System Slice.
[ 2.990191] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.007574] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.015560] systemd[1]: Starting Increase datagram queue length...
[ 3.060736] systemd[1]: Starting udev Coldplug all Devices...
[ 3.082065] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.103440] systemd[1]: Mounted Huge Pages File System.
[ 3.112177] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.149975] systemd[1]: Starting Load Kernel Modules...
[ 3.173236] systemd[1]: Mounting Debug File System...
[ 3.207394] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.215992] systemd[1]: Starting system-getty.slice.
[ 3.222829] fuse init (API version 7.23)
[ 3.237701] i2c /dev entries driver
[ 3.250091] systemd[1]: Created slice system-getty.slice.
[ 3.258400] systemd[1]: Starting File System Check on Root Device...
[ 3.278916] systemd[1]: Starting Slices.
[ 3.295956] systemd[1]: Reached target Slices.
[ 3.315815] systemd[1]: Mounted Debug File System.
[ 3.319912] piControl: built: Mi 20. Sep 07:31:34 CEST 2017
[ 3.335243] spi_master spi0: will run message pump with realtime priority 60
[ 3.338076] piControl: MAJOR-No. : 246
[ 3.338451] piControl: MAJOR-No. : 246 MINOR-No. : 0
[ 3.341418] uart-pl011 3f201000.uart: no DMA platform data
[ 3.371609] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.382693] piControl: vfs_read returned 0: b919b800, 0
[ 3.382701] piControl: syntax error: offset 0 state 0
[ 3.382735] piControl: ksz8851HardwareReset
[ 3.412358] systemd[1]: Started Increase datagram queue length.
[ 3.489207] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.498916] piControl: ksz8851InitSpi done
[ 3.522841] systemd[1]: Started File System Check on Root Device.
[ 3.538200] piControl: ksz8851Init(0)
[ 3.568157] piControl: ksz8851Init(1)
[ 3.576426] piControl: number of CPUs: 4
[ 3.576432] piControl: mGate thread started
[ 3.576611] piControl: piIO thread started
[ 3.576614] piControl: piControlInit done
[ 3.576616] piControl: RevPiDevice_init()
[ 3.576622] piControl: Enter Init State
[ 3.576628] piControl: sniff1A: mode 0 value 0
[ 3.576640] piControl: sniff1B: mode 0 value 0
[ 3.576648] piControl: sniff2A: mode 0 value 0
[ 3.576654] piControl: sniff2B: mode 0 value 0
[ 3.577664] piControl: Enter PresentSignalling1 State
[ 3.577670] piControl: sniff2A: mode 1 value 1
[ 3.577680] piControl: sniff2B: mode 1 value 1
[ 3.581633] piControl: 3553 Module L: Link check Module R: Link check
[ 3.586709] piControl: sniff2A: mode 0 value 0
[ 3.586722] piControl: sniff2B: mode 0 value 0
[ 3.616419] piControl: Enter InitialSlaveDetectionRight State
[ 3.616427] piControl: sniff1A: input value 1
[ 3.616441] piControl: sniff1B: input value 1
[ 3.616446] piControl: sniff2B: input value 0
[ 3.616930] piControl: Enter InitialSlaveDetectionLeft State
[ 3.616937] piControl: sniff1B: mode 0 value 0
[ 3.616947] piControl: sniff2A: input value 1
[ 3.617474] piControl: Enter ConfigLeftStart State
[ 3.617481] piControl: sniff1A: mode 1 value 0
[ 3.627716] piControl: Enter ConfigDialogueLeft State
[ 3.647889] piControl: GetDeviceInfo: Id 96
[ 3.667881] piControl: found 2. device on left side. Moduletype 96. Designated address 31
[ 3.667886] piControl: input offset 11 len 70
[ 3.667891] piControl: output offset 81 len 18
[ 3.668422] piControl: Enter SlaveDetectionLeft State
[ 3.678126] piControl: sniff2A: input value 0
[ 3.678657] piControl: Enter EndOfConfig State
[ 3.678666] piControl: Device 0: Addr 0 Type 5f Act 1 In 6 Out 5
[ 3.678672] piControl: input offset 0 len 6
[ 3.678676] piControl: output offset 6 len 5
[ 3.678681] piControl: serial number 1 version 1.2
[ 3.678688] piControl: Device 1: Addr 31 Type 60 Act 1 In 70 Out 18
[ 3.678692] piControl: input offset 11 len 70
[ 3.678696] piControl: output offset 81 len 18
[ 3.678701] piControl: serial number 2381 version 1.3
[ 3.678704] piControl:
[ 3.678708] piControl: sniff1A: mode 0 value 0
[ 3.678716] piControl: After Adjustment
[ 3.678722] piControl: Device 0: Addr 0 Type 5f Act 1 In 6 Out 5
[ 3.678726] piControl: input offset 0 len 6
[ 3.678730] piControl: output offset 6 len 5
[ 3.678737] piControl: Device 1: Addr 31 Type 60 Act 1 In 70 Out 18
[ 3.678743] piControl: input offset 11 len 70
[ 3.678747] piControl: output offset 81 len 18
[ 3.678750] piControl:
[ 3.787869] piControl: start data exchange
[ 3.894896] systemd[1]: Started udev Coldplug all Devices.
[ 3.906997] systemd[1]: Started Load Kernel Modules.
[ 4.004897] systemd[1]: Mounting FUSE Control File System...
[ 4.007920] piControl: piDIOComm_Init done 4
[ 4.007926] piControl: piDIOComm_Init(31): Module not configured in pictory
[ 4.007938] piControl: sniff2A: input value 0
[ 4.007943] piControl: sniff2B: input value 0
[ 4.007946] piControl: set BridgeState to running
[ 4.078869] systemd[1]: Mounting Configuration File System...
[ 4.094863] systemd[1]: Starting Apply Kernel Variables...
[ 4.112172] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 4.129023] systemd[1]: Starting Syslog Socket.
[ 4.136799] systemd[1]: Listening on Syslog Socket.
[ 4.136996] systemd[1]: Starting Journal Service...
[ 4.161404] systemd[1]: Started Journal Service.
[ 4.366956] systemd-udevd[171]: starting version 215
[ 5.449805] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 5.526877] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 6.097715] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 6.947433] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.2/input2
[ 7.088090] input: Logitech K400 Plus as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input0
[ 7.089736] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-3f980000.usb-1.2:1
[ 7.740783] systemd-journald[169]: Received request to flush runtime journal from PID 1
[ 8.136922] cfg80211: World regulatory domain updated:
[ 8.136962] cfg80211: DFS Master region: unset
[ 8.136975] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8.136992] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.137009] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 8.137024] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.137038] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 8.137069] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 8.137116] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 8.137129] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.137144] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 8.189655] usbcore: registered new interface driver rtl8192cu
[ 8.871637] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 8.872091] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.400776] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.451248] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.456527] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
Code: Select all
...
[ 9.400776] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.451248] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.456527] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 95.176871] usb 1-1.3: USB disconnect, device number 5
[ 95.458211] rtw_cmd_thread(wlan0) stop_req:1, break
[ 97.717886] usb 1-1.3: new high-speed USB device number 6 using dwc_otg
[ 97.819704] usb 1-1.3: New USB device found, idVendor=7392, idProduct=7811
[ 97.819725] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 97.819740] usb 1-1.3: Product: 802.11n WLAN Adapter
[ 97.819752] usb 1-1.3: Manufacturer: Realtek
[ 97.819765] usb 1-1.3: SerialNumber: 00e04c000001
[ 99.702257] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Code: Select all
ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether c8:3e:a7:00:28:6f brd ff:ff:ff:ff:ff:ff
inet 192.168.170.138/24 brd 192.168.170.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::2b1c:2e65:c13e:397/64 scope link
valid_lft forever preferred_lft forever
4: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 74:da:38:cf:be:9b brd ff:ff:ff:ff:ff:ff
inet6 fe80::188d:d169:a68c:3ff2/64 scope link tentative
valid_lft forever preferred_lft forever
Der Versuch, wlan0 aufzuwecken bringt keine Änderung:
Code: Select all
pi@RevPi5775:~ $ sudo ip link set dev wlan0 up
pi@RevPi5775:~ $ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether c8:3e:a7:00:28:6f brd ff:ff:ff:ff:ff:ff
inet 192.168.170.138/24 brd 192.168.170.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::2b1c:2e65:c13e:397/64 scope link
valid_lft forever preferred_lft forever
4: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 74:da:38:cf:be:9b brd ff:ff:ff:ff:ff:ff
inet6 fe80::188d:d169:a68c:3ff2/64 scope link tentative
valid_lft forever preferred_lft forever
