The Industrial Raspberry Pi Forum

Hi Team,
I have a few upcomming projects where RevPi would be ideal.
But I have never used it (using Raspberry Pis now) so I need to build a test environment.
What would be the best hardware to test the stem. I would need min of 4 Inputs and Outputs and propably the most basic Base module.
I also need to attach a touch screen to it.

Any recommendation would be much appriciated.

Hi, you can use a RevPi DIO Module and a RevPi Connect 4 Module. Here is what I would recommend you to have WLAN and much eMMC and RAM to experiment: However, if you want the cheapest basic module, you can, of course, use a different one as an alternative: