Modbus TCP Slave
Posted: 29 Aug 2024, 10:39
Does RevolutionPI already come with a server that listens to say port 502 that will reply to modbus TCP protocol?
For instance, using the webinterface, I have enabled "Enable/Disable Modbus Slave".
But after this enable and reboot, the PC still does not accept incoming connections on 502.
Specifically, I would like to read DigitalIn and DigitalOut of the RevolutionPi via ModbusTCP.
Thank you
For instance, using the webinterface, I have enabled "Enable/Disable Modbus Slave".
But after this enable and reboot, the PC still does not accept incoming connections on 502.
Specifically, I would like to read DigitalIn and DigitalOut of the RevolutionPi via ModbusTCP.
Thank you