The Industrial Raspberry Pi Forum

Hello,

I have a RevPi Connect 4 and was able to install everything on it, but when I generate the code, the following errors occur:

[ERROR]kunbusiodrvrevpibridge, 1.4.1.0 (kunbus gmbh): FB_WriteConnectorOutputs: C0032: Cannot convert type 'LWORD' to type 'DWORD'
[ERROR]kunbusiodrvrevpibridge, 1.4.1.0 (kunbus gmbh): FB_WriteConnectorOutputs: C0032: Cannot convert type 'LWORD' to type 'DWORD'
[ERROR]kunbusiodrvrevpibridge, 1.4.1.0 (kunbus gmbh): FB_WriteConnectorOutputs: C0032: Cannot convert type 'LWORD' to type 'DWORD'
[ERROR]kunbusiodrvrevpibridge, 1.4.1.0 (kunbus gmbh): FB_ReadConnectorInputs: C0032: Cannot convert type 'LWORD' to type 'DWORD'

Attached is the project tree.

Thank you in advance!

Best regards,
Stefan

Hi Stefan, have a look at the following video where everything is explained.