The Industrial Raspberry Pi Forum

Hello RevPi community,
I have recently updated a RevPi Connect+ from Stretch to Bullseye. Before the update, I saved the Pictory project and transferred to fresh install. All went well, saved to Start-Config, Reset Driver, rebooted etc.

I am unable to connect to two RevPi DI modules that are connected and were functioning before update. I have tried a fresh project also.
The first DI module to the left of the Connect+ has solid red power LED and solid green IN LED. The second DI module has a flashing red power LED.

piTest reports the following:

Hi,

Could you please provide more details?

Image version
Running kernel version
Kernel log / dmesg

With this we can hopefully find together a first clue.

Nicolai

Image installed/downloaded:
2024-02-15-revpi-bullseye-armhf.img

Kernel version:
pi@RevPi43743:~ $ uname -a
Linux RevPi43743 6.1.46-rt13-v7 #1 SMP PREEMPT_RT Mon, 5 Feb 2024 15:02:39 +0100 armv7l GNU/Linux

pi@RevPi43743:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 6.1.46-rt13-v7 (support@kunbus.com) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT_RT Mon, 5 Feb 2024 15:02:39 +0100
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Compute Module 3 Plus Rev 1.0
[ 0.000000] random: crng init done
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] percpu: Embedded 17 pages/cpu s37792 r8192 d23648 u69632
[ 0.000000] pcpu-alloc: s37792 r8192 d23648 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: coherent_pool=4M snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:BF:97:79 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 fsck.repair=yes rootwait nosplash plymouth.ignore-serial-consoles
[ 0.000000] Unknown kernel command line parameters "nosplash", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 877896K/970752K available (10240K kernel code, 1462K rwdata, 3212K rodata, 1024K init, 622K bss, 27320K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 34162 entries in 101 pages
[ 0.000000] ftrace: allocated 101 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads.
[ 0.000000] No expedited grace period (rcu_normal_after_boot).
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000017] Switching to timer-based delay loop, resolution 52ns
[ 0.000401] Console: colour dummy device 80x30
[ 0.001264] printk: console [tty1] enabled
[ 0.001305] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.001322] CPU: Testing write buffer coherency: ok
[ 0.001386] pid_max: default: 32768 minimum: 301
[ 0.001537] LSM: Security Framework initializing
[ 0.001814] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001832] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002900] cgroup: Disabling memory control group subsystem
[ 0.003621] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.005069] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.005109] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.005292] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.005330] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.005505] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.005543] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.005740] Setting up static identity map for 0x100000 - 0x10003c
[ 0.006293] rcu: Hierarchical SRCU implementation.
[ 0.006299] rcu: Max phase no-delay instances is 1000.
[ 0.006433] printk: console [tty1] printing thread started
[ 0.008087] smp: Bringing up secondary CPUs ...
[ 0.009696] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.011587] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.013340] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.013493] smp: Brought up 1 node, 4 CPUs
[ 0.013506] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.013601] CPU: All CPU(s) started in HYP mode.
[ 0.013606] CPU: Virtualization extensions available.
[ 0.014555] devtmpfs: initialized
[ 0.047186] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.047552] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.047580] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.050681] pinctrl core: initialized pinctrl subsystem
[ 0.052556] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.058109] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.071174] audit: initializing netlink subsys (disabled)
[ 0.071481] audit: type=2000 audit(0.070:1): state=initialized audit_enabled=0 res=1
[ 0.072570] thermal_sys: Registered thermal governor 'step_wise'
[ 0.072985] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.072997] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.073309] Serial: AMBA PL011 UART driver
[ 0.080357] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.100271] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:52:42, variant start
[ 0.110291] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54
[ 0.190547] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.194427] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.197422] SCSI subsystem initialized
[ 0.197876] usbcore: registered new interface driver usbfs
[ 0.197985] usbcore: registered new interface driver hub
[ 0.198064] usbcore: registered new device driver usb
[ 0.198351] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.198639] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.199083] pps_core: LinuxPPS API ver. 1 registered
[ 0.199091] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.199128] PTP clock support registered
[ 0.201466] clocksource: Switched to clocksource arch_sys_counter
[ 0.202401] VFS: Disk quotas dquot_6.6.0
[ 0.202494] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.202758] FS-Cache: Loaded
[ 0.203307] CacheFiles: Loaded
[ 0.220693] NET: Registered PF_INET protocol family
[ 0.221048] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.224129] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 10240 bytes, linear)
[ 0.224168] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.224192] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.224377] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear)
[ 0.224840] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.225013] UDP hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.225081] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.225428] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.226252] RPC: Registered named UNIX socket transport module.
[ 0.226261] RPC: Registered udp transport module.
[ 0.226267] RPC: Registered tcp transport module.
[ 0.226273] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.227429] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 2.220093] Initialise system trusted keyrings
[ 2.220584] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 2.244819] zbud: loaded
[ 2.250275] NFS: Registering the id_resolver key type
[ 2.250320] Key type id_resolver registered
[ 2.250328] Key type id_legacy registered
[ 2.250613] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.250623] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 2.253212] Key type asymmetric registered
[ 2.253224] Asymmetric key parser 'x509' registered
[ 2.253577] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.253588] io scheduler mq-deadline registered
[ 2.253596] io scheduler kyber registered
[ 2.261942] bcm2708_fb soc:fb: FB found 1 display(s)
[ 2.274140] Console: switching to colour frame buffer device 80x30
[ 2.278266] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 640x480
[ 2.282996] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 2.285579] bcm2835-rng 3f104000.rng: hwrng registered
[ 2.285970] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 2.309280] brd: module loaded
[ 2.324458] loop: module loaded
[ 2.325310] Loading iSCSI transport class v2.0-870.
[ 2.328149] usbcore: registered new interface driver lan78xx
[ 2.328262] usbcore: registered new interface driver smsc95xx
[ 2.328290] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.328484] dwc_otg: FIQ enabled
[ 2.328489] dwc_otg: NAK holdoff enabled
[ 2.328493] dwc_otg: FIQ split-transaction FSM enabled
[ 2.328509] Module dwc_common_port init
[ 2.856980] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator
[ 2.857327] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator
[ 2.909451] dwc2 3f980000.usb: DWC OTG Controller
[ 2.909497] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1
[ 2.909808] dwc2 3f980000.usb: irq 66, io mem 0x3f980000
[ 2.910249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 2.910264] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.910277] usb usb1: Product: DWC OTG Controller
[ 2.910286] usb usb1: Manufacturer: Linux 6.1.46-rt13-v7 dwc2_hsotg
[ 2.910295] usb usb1: SerialNumber: 3f980000.usb
[ 2.911417] hub 1-0:1.0: USB hub found
[ 2.911553] hub 1-0:1.0: 1 port detected
[ 2.913221] usbcore: registered new interface driver usb-storage
[ 2.913549] mousedev: PS/2 mouse device common for all mice
[ 2.920178] sdhci: Secure Digital Host Controller Interface driver
[ 2.920182] sdhci: Copyright(c) Pierre Ossman
[ 2.920338] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.921850] hid: raw HID events driver (C) Jiri Kosina
[ 2.921985] usbcore: registered new interface driver usbhid
[ 2.921989] usbhid: USB HID core driver
[ 2.922072] bcm2835_vchiq 3f00b840.mailbox: there is not valid maps for state default
[ 2.926267] Initializing XFRM netlink socket
[ 2.926317] NET: Registered PF_PACKET protocol family
[ 2.926415] Key type dns_resolver registered
[ 2.926564] Registering SWP/SWPB emulation handler
[ 2.927286] registered taskstats version 1
[ 2.927330] Loading compiled-in X.509 certificates
[ 2.927991] Key type .fscrypt registered
[ 2.927995] Key type fscrypt-provisioning registered
[ 2.939203] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
[ 2.939423] serial serial0: tty port ttyAMA0 registered
[ 2.939859] uart-pl011 3f201000.serial: no DMA platform data
[ 2.940873] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 2.941129] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 2.946917] rtc-pcf2127-i2c 1-0051: registered as rtc0
[ 2.948029] rtc-pcf2127-i2c 1-0051: setting system clock to 2024-03-12T20:13:37 UTC (1710274417)
[ 2.949507] sdhost: log_buf @ eb8e36aa (f7802000)
[ 2.997734] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 3.000123] of_cfs_init
[ 3.000246] of_cfs_init: OK
[ 3.001122] Waiting for root device /dev/mmcblk0p2...
[ 3.064787] mmc0: new high speed MMC card at address 0001
[ 3.065495] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
[ 3.067797] mmcblk0: p1 p2
[ 3.068310] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
[ 3.068577] mmcblk0boot0: mmc0:0001 AJTD4R 4.00 MiB
[ 3.070305] mmcblk0boot1: mmc0:0001 AJTD4R 4.00 MiB
[ 3.072095] mmcblk0rpmb: mmc0:0001 AJTD4R 4.00 MiB, chardev (245:0)
[ 3.089290] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 3.089301] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 3.261493] usb 1-1: new high-speed USB device number 2 using dwc2
[ 3.511770] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 3.511787] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.512416] hub 1-1:1.0: USB hub found
[ 3.512500] hub 1-1:1.0: 5 ports detected
[ 3.817049] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[ 3.819797] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
[ 3.819810] EXT4-fs (mmcblk0p2): 1 truncate cleaned up
[ 3.819819] EXT4-fs (mmcblk0p2): recovery complete
[ 3.830472] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 3.830566] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 3.831507] usb 1-1.1: new high-speed USB device number 3 using dwc2
[ 3.831860] devtmpfs: mounted
[ 3.837615] Freeing unused kernel image (initmem) memory: 1024K
[ 3.871746] Run /sbin/init as init process
[ 3.871752] with arguments:
[ 3.871754] /sbin/init
[ 3.871756] nosplash
[ 3.871758] with environment:
[ 3.871776] HOME=/
[ 3.871778] TERM=linux
[ 3.961971] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 3.961985] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.964719] smsc95xx v2.0.0
[ 4.364214] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=199)
[ 4.365241] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, c8:3e:a7:01:98:12
[ 4.461495] usb 1-1.5: new high-speed USB device number 4 using dwc2
[ 4.577192] NET: Registered PF_INET6 protocol family
[ 4.578390] Segment Routing with IPv6
[ 4.578416] In-situ OAM (IOAM) with IPv6
[ 4.602009] usb 1-1.5: New USB device found, idVendor=0424, idProduct=9512, bcdDevice= 2.00
[ 4.602029] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.602837] hub 1-1.5:1.0: USB hub found
[ 4.602966] hub 1-1.5:1.0: 3 ports detected
[ 4.622547] systemd[1]: systemd 247.3-7+rpi1+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 4.623205] systemd[1]: Detected architecture arm.
[ 4.642385] systemd[1]: Set hostname to <RevPi43743>.
[ 4.921573] usb 1-1.5.1: new high-speed USB device number 5 using dwc2
[ 5.051987] usb 1-1.5.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 5.052003] usb 1-1.5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.054761] smsc95xx v2.0.0
[ 5.174346] SMSC LAN8700 usb-001:005:01: attached PHY driver (mii_bus:phy_addr=usb-001:005:01, irq=200)
[ 5.175482] smsc95xx 1-1.5.1:1.0 eth1: register 'smsc95xx' at usb-3f980000.usb-1.5.1, smsc95xx USB 2.0 Ethernet, c8:3e:a7:01:98:13
[ 5.281523] usb 1-1.5.2: new full-speed USB device number 6 using dwc2
[ 5.331410] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 5.428418] usb 1-1.5.2: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ 5.428435] usb 1-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.428441] usb 1-1.5.2: Product: FT232R USB UART
[ 5.428446] usb 1-1.5.2: Manufacturer: FTDI
[ 5.428450] usb 1-1.5.2: SerialNumber: AV0JI82Y
[ 5.531536] usb 1-1.5.3: new full-speed USB device number 7 using dwc2
[ 5.598776] systemd[1]: Queued start job for default target Multi-User System.
[ 5.667992] usb 1-1.5.3: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
[ 5.668006] usb 1-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.668012] usb 1-1.5.3: Product: FT232R USB UART
[ 5.668017] usb 1-1.5.3: Manufacturer: FTDI
[ 5.668021] usb 1-1.5.3: SerialNumber: AV0JI87R
[ 5.694880] systemd[1]: Created slice system-getty.slice.
[ 5.697589] systemd[1]: Created slice system-modprobe.slice.
[ 5.700004] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.702405] systemd[1]: Created slice User and Session Slice.
[ 5.705782] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.708082] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.710103] systemd[1]: Reached target Slices.
[ 5.711620] systemd[1]: Reached target Swap.
[ 5.716478] systemd[1]: Listening on Syslog Socket.
[ 5.718393] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.720002] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 5.722346] systemd[1]: Listening on Journal Audit Socket.
[ 5.727674] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.729583] systemd[1]: Listening on Journal Socket.
[ 5.732221] systemd[1]: Listening on udev Control Socket.
[ 5.735362] systemd[1]: Listening on udev Kernel Socket.
[ 5.737258] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 5.740915] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.746451] systemd[1]: Mounting RPC Pipe File System...
[ 5.752541] systemd[1]: Mounting Kernel Debug File System...
[ 5.759920] systemd[1]: Mounting Kernel Trace File System...
[ 5.763406] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 5.768908] systemd[1]: Starting Set the console keyboard layout...
[ 5.776323] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 5.782623] systemd[1]: Starting Load Kernel Module configfs...
[ 5.789956] systemd[1]: Starting Load Kernel Module drm...
[ 5.802693] systemd[1]: Starting Load Kernel Module fuse...
[ 5.818591] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 5.823794] systemd[1]: Starting File System Check on Root Device...
[ 5.837364] systemd[1]: Starting Journal Service...
[ 5.844634] fuse: init (API version 7.37)
[ 5.863961] systemd[1]: Starting Load Kernel Modules...
[ 5.871878] systemd[1]: Starting Coldplug All udev Devices...
[ 5.907829] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.913933] systemd[1]: Mounted RPC Pipe File System.
[ 5.919433] systemd[1]: Mounted Kernel Debug File System.
[ 5.922427] systemd[1]: Mounted Kernel Trace File System.
[ 5.926290] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 5.929813] systemd[1]: modprobe@configfs.service: Succeeded.
[ 5.930902] systemd[1]: Finished Load Kernel Module configfs.
[ 5.934619] systemd[1]: modprobe@fuse.service: Succeeded.
[ 5.935689] systemd[1]: Finished Load Kernel Module fuse.
[ 5.943196] systemd[1]: Mounting FUSE Control File System...
[ 5.952280] systemd[1]: Mounting Kernel Configuration File System...
[ 5.964649] systemd[1]: Started File System Check Daemon to report status.
[ 5.981848] systemd[1]: modprobe@drm.service: Succeeded.
[ 5.983233] systemd[1]: Finished Load Kernel Module drm.
[ 5.987752] systemd[1]: Mounted FUSE Control File System.
[ 5.989732] systemd[1]: Mounted Kernel Configuration File System.
[ 6.008873] i2c_dev: i2c /dev entries driver
[ 6.154482] systemd[1]: Started Journal Service.
[ 6.366055] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[ 6.491145] systemd-journald[154]: Received client request to flush runtime journal.
[ 6.507724] piControl: loading out-of-tree module taints kernel.
[ 6.515442] piControl: built: Tue Feb 6 15:16:29 UTC 2024
[ 6.515460] piControl: RevPi Connect
[ 6.515467] piControl: MAJOR-No. : 242
[ 6.515931] piControl: MAJOR-No. : 242 MINOR-No. : 0
[ 6.522375] systemd-journald[154]: File /var/log/journal/e660bc367865433194503777438218db/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 6.563220] piControl: read file finished, f_pos=9609
[ 6.563296] piControl: 3 devices found
[ 6.563301] piControl: 152 entries in total
[ 6.563700] piControl: cl-comp: 0 addr 232 bit ff len 8
[ 6.566113] piControl: set priority of spi0 to 54
[ 6.566339] piControl: piIO thread started
[ 6.566344] piControl: RevPiDevice_init()
[ 6.566350] piControl: Enter Init State
[ 6.566757] piControl: piControlInit done
[ 6.566989] piControl: Enter PresentSignalling1 State
[ 6.606121] piControl: Enter InitialSlaveDetectionLeft State
[ 6.606666] piControl: Enter ConfigLeftStart State
[ 6.617098] piControl: Enter ConfigDialogueLeft State
[ 6.651578] piControl: GetDeviceInfo: Id 97
[ 6.681556] piControl: found 2. device on left side. Moduletype 97. Designated address 31
[ 6.681574] piControl: input offset 11 len 70
[ 6.681578] piControl: output offset 81 len 18
[ 6.682120] piControl: Enter SlaveDetectionLeft State
[ 6.692095] piControl: Enter EndOfConfig State

[ 6.692105] piControl: Device 0: Addr 0 Type 105 Act 1 In 6 Out 5
[ 6.692115] piControl: input offset 0 len 6
[ 6.692118] piControl: output offset 6 len 5
[ 6.692121] piControl: serial number 1 version 1.0
[ 6.692126] piControl: Device 1: Addr 31 Type 97 Act 1 In 70 Out 18
[ 6.692132] piControl: input offset 11 len 70
[ 6.692144] piControl: output offset 81 len 18
[ 6.692148] piControl: serial number 49297 version 1.5
[ 6.692152] piControl:
[ 6.692160] piControl: Adjust: base 226 in 226 out 232 conf 0
[ 6.692165] piControl: Adjust: base 113 in 113 out 183 conf 201
[ 6.692172] piControl: After Adjustment
[ 6.692174] piControl: Device 0: Addr 0 Type 105 Act 1 In 6 Out 5
[ 6.692179] piControl: input offset 226 len 6
[ 6.692183] piControl: output offset 232 len 5
[ 6.692186] piControl: Device 1: Addr 31 Type 97 Act 1 In 70 Out 18
[ 6.692192] piControl: input offset 113 len 70
[ 6.692195] piControl: output offset 183 len 18
[ 6.692199] piControl: Device 2: Addr 30 Type 32865 Act 0 In 70 Out 18
[ 6.692204] piControl: input offset 0 len 70
[ 6.692208] piControl: output offset 70 len 18
[ 6.692211] piControl:
[ 6.811581] piControl: start data exchange
[ 7.053720] piControl: piDIOComm_Init done 0
[ 7.055540] piControl: initialization of module not finished (0,0,4) -> retry
[ 7.056077] piControl: Enter Initialization Retry
[ 9.391857] ks8851 spi0.1: supply vdd-io not found, using dummy regulator
[ 9.501535] ks8851 spi0.1: message enable is 0
[ 9.546028] ks8851 spi0.1 eth2: revision 1, MAC 4a:1d:fa:2d:cc:a1, IRQ 201, no EEPROM
[ 9.605937] piControl: RevPiDevice_init()
[ 9.606513] piControl: Enter Init State
[ 9.607082] piControl: Enter PresentSignalling1 State
[ 9.646434] piControl: Enter InitialSlaveDetectionLeft State
[ 9.646979] piControl: Enter ConfigLeftStart State
[ 9.657541] piControl: Enter ConfigDialogueLeft State
[ 9.659254] pi-bridge serial0-0: invalid checksum (expected: 0x86, got 0x06)
[ 9.659281] piControl: Error sending gate request: -74
[ 9.681591] piControl: piIoComm_sendRS485Tel(GetDeviceInfo) failed -74
[ 9.683891] pi-bridge serial0-0: invalid checksum (expected: 0x86, got 0x06)
[ 9.683909] piControl: Error sending gate request: -74
[ 9.711581] piControl: piIoComm_sendRS485Tel(GetDeviceInfo) failed -74
[ 9.713970] pi-bridge serial0-0: invalid checksum (expected: 0x86, got 0x06)
[ 9.713991] piControl: Error sending gate request: -74
[ 9.741584] piControl: piIoComm_sendRS485Tel(GetDeviceInfo) failed -74
[ 9.743863] pi-bridge serial0-0: invalid checksum (expected: 0x86, got 0x06)
[ 9.743888] piControl: Error sending gate request: -74
[ 9.771584] piControl: piIoComm_sendRS485Tel(GetDeviceInfo) failed -74
[ 9.772141] piControl: Enter EndOfConfig State

[ 9.772147] piControl: Device 0: Addr 0 Type 105 Act 1 In 6 Out 5
[ 9.772155] piControl: input offset 0 len 6
[ 9.772158] piControl: output offset 6 len 5
[ 9.772162] piControl: serial number 1 version 1.0
[ 9.772166] piControl:
[ 9.772177] piControl: Adjust: base 226 in 226 out 232 conf 0
[ 9.772185] piControl: After Adjustment
[ 9.772188] piControl: Device 0: Addr 0 Type 105 Act 1 In 6 Out 5
[ 9.772193] piControl: input offset 226 len 6
[ 9.772197] piControl: output offset 232 len 5
[ 9.772200] piControl: Device 1: Addr 30 Type 32865 Act 0 In 70 Out 18
[ 9.772206] piControl: input offset 0 len 70
[ 9.772210] piControl: output offset 70 len 18
[ 9.772219] piControl: Device 2: Addr 31 Type 32865 Act 0 In 70 Out 18
[ 9.772232] piControl: input offset 113 len 70
[ 9.772235] piControl: output offset 183 len 18
[ 9.772239] piControl:
[ 9.891555] piControl: start data exchange
[ 10.019812] mc: Linux media interface: v0.10
[ 10.072648] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.074519] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 10.074538] [vc_sm_connected_init]: start
[ 10.084811] [vc_sm_connected_init]: installed successfully
[ 10.131554] piControl: set BridgeState to running
[ 10.136098] videodev: Linux video capture interface: v2.00
[ 10.149118] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.215994] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.217189] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.226796] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.231003] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.242219] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 10.242787] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 10.243577] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 10.244085] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 10.244110] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 10.244124] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 10.244159] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 10.244170] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 10.248204] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.249089] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 10.249580] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 10.250080] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 10.250448] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 10.250472] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 10.250487] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 10.250499] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 10.250511] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 10.250855] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 10.258271] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.270004] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 10.270048] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 10.274523] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 10.274568] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 10.277877] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 10.277913] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 10.283017] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 10.283351] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 10.293267] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 10.293315] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 10.523986] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 11.147423] usbcore: registered new interface driver usbserial_generic
[ 11.147493] usbserial: USB Serial support registered for generic
[ 11.190258] usbcore: registered new interface driver ftdi_sio
[ 11.190466] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 11.190709] ftdi_sio 1-1.5.2:1.0: FTDI USB Serial Device converter detected
[ 11.190952] usb 1-1.5.2: Detected FT232R
[ 11.206299] usb 1-1.5.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 11.207544] ftdi_sio 1-1.5.3:1.0: FTDI USB Serial Device converter detected
[ 11.207759] usb 1-1.5.3: Detected FT232R
[ 11.221623] usb 1-1.5.3: FTDI USB Serial Device converter now attached to ttyUSB1
[ 14.564702] ks8851 spi0.1 pileft: renamed from eth2
[ 15.087453] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 15.091394] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
[ 15.097905] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.179170] smsc95xx 1-1.5.1:1.0 eth1: hardware isn't capable of remote wakeup
[ 15.187034] smsc95xx 1-1.5.1:1.0 eth1: Link is Down
[ 21.417314] capability: warning: `zerotier-one' uses 32-bit capabilities (legacy support in use)
[ 21.718110] tun: Universal TUN/TAP device driver, 1.6

Contents of /var/log/kern.log
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Linux version 6.1.46-rt13-v7 (support@kunbus.com) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT_RT Mon, 5 Feb 2024 15:02:39 +0100
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] CPU: div instructions available: patching division code
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] OF: fdt: Machine model: Raspberry Pi Compute Module 3 Plus Rev 1.0
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] random: crng init done
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Memory policy: Data cache writealloc
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Zone ranges:
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Normal empty
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Movable zone start for each node
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Early memory node ranges
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] percpu: Embedded 17 pages/cpu s37792 r8192 d23648 u69632
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] pcpu-alloc: s37792 r8192 d23648 u69632 alloc=17*4096
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Kernel command line: coherent_pool=4M snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:BF:97:79 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 fsck.repair=yes rootwait nosplash plymouth.ignore-serial-consoles
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Unknown kernel command line parameters "nosplash", will be passed to user space.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Memory: 877896K/970752K available (10240K kernel code, 1462K rwdata, 3212K rodata, 1024K init, 622K bss, 27320K reserved, 65536K cma-reserved)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] ftrace: allocating 34162 entries in 101 pages
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] ftrace: allocated 101 pages with 4 groups
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] trace event string verifier disabled
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] No expedited grace period (rcu_normal_after_boot).
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Trampoline variant of Tasks RCU enabled.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Rude variant of Tasks RCU enabled.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] Tracing variant of Tasks RCU enabled.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000017] Switching to timer-based delay loop, resolution 52ns
Mar 12 20:13:47 RevPi43743 kernel: [ 0.000401] Console: colour dummy device 80x30
Mar 12 20:13:47 RevPi43743 kernel: [ 0.001264] printk: console [tty1] enabled
Mar 12 20:13:47 RevPi43743 kernel: [ 0.001305] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.001322] CPU: Testing write buffer coherency: ok
Mar 12 20:13:47 RevPi43743 kernel: [ 0.001386] pid_max: default: 32768 minimum: 301
Mar 12 20:13:47 RevPi43743 kernel: [ 0.001537] LSM: Security Framework initializing
Mar 12 20:13:47 RevPi43743 kernel: [ 0.001814] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.001832] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.002900] cgroup: Disabling memory control group subsystem
Mar 12 20:13:47 RevPi43743 kernel: [ 0.003621] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Mar 12 20:13:47 RevPi43743 kernel: [ 0.005069] cblist_init_generic: Setting adjustable number of callback queues.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.005109] cblist_init_generic: Setting shift to 2 and lim to 1.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.005292] cblist_init_generic: Setting adjustable number of callback queues.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.005330] cblist_init_generic: Setting shift to 2 and lim to 1.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.005505] cblist_init_generic: Setting adjustable number of callback queues.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.005543] cblist_init_generic: Setting shift to 2 and lim to 1.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.005740] Setting up static identity map for 0x100000 - 0x10003c
Mar 12 20:13:47 RevPi43743 kernel: [ 0.006293] rcu: Hierarchical SRCU implementation.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.006299] rcu: Max phase no-delay instances is 1000.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.006433] printk: console [tty1] printing thread started
Mar 12 20:13:47 RevPi43743 kernel: [ 0.008087] smp: Bringing up secondary CPUs ...
Mar 12 20:13:47 RevPi43743 kernel: [ 0.009696] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Mar 12 20:13:47 RevPi43743 kernel: [ 0.011587] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
Mar 12 20:13:47 RevPi43743 kernel: [ 0.013340] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
Mar 12 20:13:47 RevPi43743 kernel: [ 0.013493] smp: Brought up 1 node, 4 CPUs
Mar 12 20:13:47 RevPi43743 kernel: [ 0.013506] SMP: Total of 4 processors activated (153.60 BogoMIPS).
Mar 12 20:13:47 RevPi43743 kernel: [ 0.013601] CPU: All CPU(s) started in HYP mode.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.013606] CPU: Virtualization extensions available.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.014555] devtmpfs: initialized
Mar 12 20:13:47 RevPi43743 kernel: [ 0.047186] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
Mar 12 20:13:47 RevPi43743 kernel: [ 0.047552] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Mar 12 20:13:47 RevPi43743 kernel: [ 0.047580] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.050681] pinctrl core: initialized pinctrl subsystem
Mar 12 20:13:47 RevPi43743 kernel: [ 0.052556] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Mar 12 20:13:47 RevPi43743 kernel: [ 0.058109] DMA: preallocated 4096 KiB pool for atomic coherent allocations
Mar 12 20:13:47 RevPi43743 kernel: [ 0.071174] audit: initializing netlink subsys (disabled)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.071481] audit: type=2000 audit(0.070:1): state=initialized audit_enabled=0 res=1
Mar 12 20:13:47 RevPi43743 kernel: [ 0.072570] thermal_sys: Registered thermal governor 'step_wise'
Mar 12 20:13:47 RevPi43743 kernel: [ 0.072985] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.072997] hw-breakpoint: maximum watchpoint size is 8 bytes.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.073309] Serial: AMBA PL011 UART driver
Mar 12 20:13:47 RevPi43743 kernel: [ 0.080357] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
Mar 12 20:13:47 RevPi43743 kernel: [ 0.100271] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:52:42, variant start
Mar 12 20:13:47 RevPi43743 kernel: [ 0.110291] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54
Mar 12 20:13:47 RevPi43743 kernel: [ 0.190547] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.194427] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
Mar 12 20:13:47 RevPi43743 kernel: [ 0.197422] SCSI subsystem initialized
Mar 12 20:13:47 RevPi43743 kernel: [ 0.197876] usbcore: registered new interface driver usbfs
Mar 12 20:13:47 RevPi43743 kernel: [ 0.197985] usbcore: registered new interface driver hub
Mar 12 20:13:47 RevPi43743 kernel: [ 0.198064] usbcore: registered new device driver usb
Mar 12 20:13:47 RevPi43743 kernel: [ 0.198351] usb_phy_generic phy: supply vcc not found, using dummy regulator
Mar 12 20:13:47 RevPi43743 kernel: [ 0.198639] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
Mar 12 20:13:47 RevPi43743 kernel: [ 0.199083] pps_core: LinuxPPS API ver. 1 registered
Mar 12 20:13:47 RevPi43743 kernel: [ 0.199091] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Mar 12 20:13:47 RevPi43743 kernel: [ 0.199128] PTP clock support registered
Mar 12 20:13:47 RevPi43743 kernel: [ 0.201466] clocksource: Switched to clocksource arch_sys_counter
Mar 12 20:13:47 RevPi43743 kernel: [ 0.202401] VFS: Disk quotas dquot_6.6.0
Mar 12 20:13:47 RevPi43743 kernel: [ 0.202494] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.202758] FS-Cache: Loaded
Mar 12 20:13:47 RevPi43743 kernel: [ 0.203307] CacheFiles: Loaded
Mar 12 20:13:47 RevPi43743 kernel: [ 0.220693] NET: Registered PF_INET protocol family
Mar 12 20:13:47 RevPi43743 kernel: [ 0.221048] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.224129] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 10240 bytes, linear)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.224168] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.224192] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.224377] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.224840] TCP: Hash tables configured (established 8192 bind 8192)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.225013] UDP hash table entries: 512 (order: 2, 24576 bytes, linear)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.225081] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes, linear)
Mar 12 20:13:47 RevPi43743 kernel: [ 0.225428] NET: Registered PF_UNIX/PF_LOCAL protocol family
Mar 12 20:13:47 RevPi43743 kernel: [ 0.226252] RPC: Registered named UNIX socket transport module.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.226261] RPC: Registered udp transport module.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.226267] RPC: Registered tcp transport module.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.226273] RPC: Registered tcp NFSv4.1 backchannel transport module.
Mar 12 20:13:47 RevPi43743 kernel: [ 0.227429] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
Mar 12 20:13:47 RevPi43743 kernel: [ 2.220093] Initialise system trusted keyrings
Mar 12 20:13:47 RevPi43743 kernel: [ 2.220584] workingset: timestamp_bits=14 max_order=18 bucket_order=4
Mar 12 20:13:47 RevPi43743 kernel: [ 2.244819] zbud: loaded
Mar 12 20:13:47 RevPi43743 kernel: [ 2.250275] NFS: Registering the id_resolver key type
Mar 12 20:13:47 RevPi43743 kernel: [ 2.250320] Key type id_resolver registered
Mar 12 20:13:47 RevPi43743 kernel: [ 2.250328] Key type id_legacy registered
Mar 12 20:13:47 RevPi43743 kernel: [ 2.250613] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Mar 12 20:13:47 RevPi43743 kernel: [ 2.250623] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Mar 12 20:13:47 RevPi43743 kernel: [ 2.253212] Key type asymmetric registered
Mar 12 20:13:47 RevPi43743 kernel: [ 2.253224] Asymmetric key parser 'x509' registered
Mar 12 20:13:47 RevPi43743 kernel: [ 2.253577] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Mar 12 20:13:47 RevPi43743 kernel: [ 2.253588] io scheduler mq-deadline registered
Mar 12 20:13:47 RevPi43743 kernel: [ 2.253596] io scheduler kyber registered
Mar 12 20:13:47 RevPi43743 kernel: [ 2.261942] bcm2708_fb soc:fb: FB found 1 display(s)
Mar 12 20:13:47 RevPi43743 kernel: [ 2.274140] Console: switching to colour frame buffer device 80x30
Mar 12 20:13:47 RevPi43743 kernel: [ 2.278266] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 640x480
Mar 12 20:13:47 RevPi43743 kernel: [ 2.282996] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
Mar 12 20:13:47 RevPi43743 kernel: [ 2.285579] bcm2835-rng 3f104000.rng: hwrng registered
Mar 12 20:13:47 RevPi43743 kernel: [ 2.285970] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
Mar 12 20:13:47 RevPi43743 kernel: [ 2.309280] brd: module loaded
Mar 12 20:13:47 RevPi43743 kernel: [ 2.324458] loop: module loaded
Mar 12 20:13:47 RevPi43743 kernel: [ 2.325310] Loading iSCSI transport class v2.0-870.
Mar 12 20:13:47 RevPi43743 kernel: [ 2.328149] usbcore: registered new interface driver lan78xx
Mar 12 20:13:47 RevPi43743 kernel: [ 2.328262] usbcore: registered new interface driver smsc95xx
Mar 12 20:13:47 RevPi43743 kernel: [ 2.328290] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Mar 12 20:13:47 RevPi43743 kernel: [ 2.328484] dwc_otg: FIQ enabled
Mar 12 20:13:47 RevPi43743 kernel: [ 2.328489] dwc_otg: NAK holdoff enabled
Mar 12 20:13:47 RevPi43743 kernel: [ 2.328493] dwc_otg: FIQ split-transaction FSM enabled
Mar 12 20:13:47 RevPi43743 kernel: [ 2.328509] Module dwc_common_port init
Mar 12 20:13:47 RevPi43743 kernel: [ 2.856980] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator
Mar 12 20:13:47 RevPi43743 kernel: [ 2.857327] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator
Mar 12 20:13:47 RevPi43743 kernel: [ 2.909451] dwc2 3f980000.usb: DWC OTG Controller
Mar 12 20:13:47 RevPi43743 kernel: [ 2.909497] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1
Mar 12 20:13:47 RevPi43743 kernel: [ 2.909808] dwc2 3f980000.usb: irq 66, io mem 0x3f980000
Mar 12 20:13:47 RevPi43743 kernel: [ 2.910249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
Mar 12 20:13:47 RevPi43743 kernel: [ 2.910264] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 12 20:13:47 RevPi43743 kernel: [ 2.910277] usb usb1: Product: DWC OTG Controller
Mar 12 20:13:47 RevPi43743 kernel: [ 2.910286] usb usb1: Manufacturer: Linux 6.1.46-rt13-v7 dwc2_hsotg
Mar 12 20:13:47 RevPi43743 kernel: [ 2.910295] usb usb1: SerialNumber: 3f980000.usb
Mar 12 20:13:47 RevPi43743 kernel: [ 2.911417] hub 1-0:1.0: USB hub found
Mar 12 20:13:47 RevPi43743 kernel: [ 2.911553] hub 1-0:1.0: 1 port detected
Mar 12 20:13:47 RevPi43743 kernel: [ 2.913221] usbcore: registered new interface driver usb-storage
Mar 12 20:13:47 RevPi43743 kernel: [ 2.913549] mousedev: PS/2 mouse device common for all mice
Mar 12 20:13:47 RevPi43743 kernel: [ 2.920178] sdhci: Secure Digital Host Controller Interface driver
Mar 12 20:13:47 RevPi43743 kernel: [ 2.920182] sdhci: Copyright(c) Pierre Ossman
Mar 12 20:13:47 RevPi43743 kernel: [ 2.920338] sdhci-pltfm: SDHCI platform and OF driver helper
Mar 12 20:13:47 RevPi43743 kernel: [ 2.921850] hid: raw HID events driver (C) Jiri Kosina
Mar 12 20:13:47 RevPi43743 kernel: [ 2.921985] usbcore: registered new interface driver usbhid
Mar 12 20:13:47 RevPi43743 kernel: [ 2.921989] usbhid: USB HID core driver
Mar 12 20:13:47 RevPi43743 kernel: [ 2.922072] bcm2835_vchiq 3f00b840.mailbox: there is not valid maps for state default
Mar 12 20:13:47 RevPi43743 kernel: [ 2.926267] Initializing XFRM netlink socket
Mar 12 20:13:47 RevPi43743 kernel: [ 2.926317] NET: Registered PF_PACKET protocol family
Mar 12 20:13:47 RevPi43743 kernel: [ 2.926415] Key type dns_resolver registered
Mar 12 20:13:47 RevPi43743 kernel: [ 2.926564] Registering SWP/SWPB emulation handler
Mar 12 20:13:47 RevPi43743 kernel: [ 2.927286] registered taskstats version 1
Mar 12 20:13:47 RevPi43743 kernel: [ 2.927330] Loading compiled-in X.509 certificates
Mar 12 20:13:47 RevPi43743 kernel: [ 2.927991] Key type .fscrypt registered
Mar 12 20:13:47 RevPi43743 kernel: [ 2.927995] Key type fscrypt-provisioning registered
Mar 12 20:13:47 RevPi43743 kernel: [ 2.939203] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
Mar 12 20:13:47 RevPi43743 kernel: [ 2.939423] serial serial0: tty port ttyAMA0 registered
Mar 12 20:13:47 RevPi43743 kernel: [ 2.939859] uart-pl011 3f201000.serial: no DMA platform data
Mar 12 20:13:47 RevPi43743 kernel: [ 2.940873] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
Mar 12 20:13:47 RevPi43743 kernel: [ 2.941129] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
Mar 12 20:13:47 RevPi43743 kernel: [ 2.946917] rtc-pcf2127-i2c 1-0051: registered as rtc0
Mar 12 20:13:47 RevPi43743 kernel: [ 2.948029] rtc-pcf2127-i2c 1-0051: setting system clock to 2024-03-12T20:13:37 UTC (1710274417)
Mar 12 20:13:47 RevPi43743 kernel: [ 2.949507] sdhost: log_buf @ eb8e36aa (f7802000)
Mar 12 20:13:47 RevPi43743 kernel: [ 2.997734] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
Mar 12 20:13:47 RevPi43743 kernel: [ 3.000123] of_cfs_init
Mar 12 20:13:47 RevPi43743 kernel: [ 3.000246] of_cfs_init: OK
Mar 12 20:13:47 RevPi43743 kernel: [ 3.001122] Waiting for root device /dev/mmcblk0p2...
Mar 12 20:13:47 RevPi43743 kernel: [ 3.064787] mmc0: new high speed MMC card at address 0001
Mar 12 20:13:47 RevPi43743 kernel: [ 3.065495] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
Mar 12 20:13:47 RevPi43743 kernel: [ 3.067797] mmcblk0: p1 p2
Mar 12 20:13:47 RevPi43743 kernel: [ 3.068310] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
Mar 12 20:13:47 RevPi43743 kernel: [ 3.068577] mmcblk0boot0: mmc0:0001 AJTD4R 4.00 MiB
Mar 12 20:13:47 RevPi43743 kernel: [ 3.070305] mmcblk0boot1: mmc0:0001 AJTD4R 4.00 MiB
Mar 12 20:13:47 RevPi43743 kernel: [ 3.072095] mmcblk0rpmb: mmc0:0001 AJTD4R 4.00 MiB, chardev (245:0)
Mar 12 20:13:47 RevPi43743 kernel: [ 3.089290] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Mar 12 20:13:47 RevPi43743 kernel: [ 3.089301] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Mar 12 20:13:47 RevPi43743 kernel: [ 3.261493] usb 1-1: new high-speed USB device number 2 using dwc2
Mar 12 20:13:47 RevPi43743 kernel: [ 3.511770] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
Mar 12 20:13:47 RevPi43743 kernel: [ 3.511787] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 12 20:13:47 RevPi43743 kernel: [ 3.512416] hub 1-1:1.0: USB hub found
Mar 12 20:13:47 RevPi43743 kernel: [ 3.512500] hub 1-1:1.0: 5 ports detected
Mar 12 20:13:47 RevPi43743 kernel: [ 3.817049] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
Mar 12 20:13:47 RevPi43743 kernel: [ 3.819797] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
Mar 12 20:13:47 RevPi43743 kernel: [ 3.819810] EXT4-fs (mmcblk0p2): 1 truncate cleaned up
Mar 12 20:13:47 RevPi43743 kernel: [ 3.819819] EXT4-fs (mmcblk0p2): recovery complete
Mar 12 20:13:47 RevPi43743 kernel: [ 3.830472] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
Mar 12 20:13:47 RevPi43743 kernel: [ 3.830566] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Mar 12 20:13:47 RevPi43743 kernel: [ 3.831507] usb 1-1.1: new high-speed USB device number 3 using dwc2
Mar 12 20:13:47 RevPi43743 kernel: [ 3.831860] devtmpfs: mounted
Mar 12 20:13:47 RevPi43743 kernel: [ 3.837615] Freeing unused kernel image (initmem) memory: 1024K
Mar 12 20:13:47 RevPi43743 kernel: [ 3.871746] Run /sbin/init as init process
Mar 12 20:13:47 RevPi43743 kernel: [ 3.871752] with arguments:
Mar 12 20:13:47 RevPi43743 kernel: [ 3.871754] /sbin/init
Mar 12 20:13:47 RevPi43743 kernel: [ 3.871756] nosplash
Mar 12 20:13:47 RevPi43743 kernel: [ 3.871758] with environment:
Mar 12 20:13:47 RevPi43743 kernel: [ 3.871776] HOME=/
Mar 12 20:13:47 RevPi43743 kernel: [ 3.871778] TERM=linux
Mar 12 20:13:47 RevPi43743 kernel: [ 3.961971] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
Mar 12 20:13:47 RevPi43743 kernel: [ 3.961985] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 12 20:13:47 RevPi43743 kernel: [ 3.964719] smsc95xx v2.0.0
Mar 12 20:13:47 RevPi43743 kernel: [ 4.364214] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=199)
Mar 12 20:13:47 RevPi43743 kernel: [ 4.365241] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, c8:3e:a7:01:98:12
Mar 12 20:13:47 RevPi43743 kernel: [ 4.461495] usb 1-1.5: new high-speed USB device number 4 using dwc2
Mar 12 20:13:47 RevPi43743 kernel: [ 4.577192] NET: Registered PF_INET6 protocol family
Mar 12 20:13:47 RevPi43743 kernel: [ 4.578390] Segment Routing with IPv6
Mar 12 20:13:47 RevPi43743 kernel: [ 4.578416] In-situ OAM (IOAM) with IPv6
Mar 12 20:13:47 RevPi43743 kernel: [ 4.602009] usb 1-1.5: New USB device found, idVendor=0424, idProduct=9512, bcdDevice= 2.00
Mar 12 20:13:47 RevPi43743 kernel: [ 4.602029] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 12 20:13:47 RevPi43743 kernel: [ 4.602837] hub 1-1.5:1.0: USB hub found
Mar 12 20:13:47 RevPi43743 kernel: [ 4.602966] hub 1-1.5:1.0: 3 ports detected
Mar 12 20:13:47 RevPi43743 kernel: [ 4.921573] usb 1-1.5.1: new high-speed USB device number 5 using dwc2
Mar 12 20:13:47 RevPi43743 kernel: [ 5.051987] usb 1-1.5.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
Mar 12 20:13:47 RevPi43743 kernel: [ 5.052003] usb 1-1.5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 12 20:13:47 RevPi43743 kernel: [ 5.054761] smsc95xx v2.0.0
Mar 12 20:13:47 RevPi43743 kernel: [ 5.174346] SMSC LAN8700 usb-001:005:01: attached PHY driver (mii_bus:phy_addr=usb-001:005:01, irq=200)
Mar 12 20:13:47 RevPi43743 kernel: [ 5.175482] smsc95xx 1-1.5.1:1.0 eth1: register 'smsc95xx' at usb-3f980000.usb-1.5.1, smsc95xx USB 2.0 Ethernet, c8:3e:a7:01:98:13
Mar 12 20:13:47 RevPi43743 kernel: [ 5.281523] usb 1-1.5.2: new full-speed USB device number 6 using dwc2
Mar 12 20:13:47 RevPi43743 kernel: [ 5.428418] usb 1-1.5.2: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Mar 12 20:13:47 RevPi43743 kernel: [ 5.428435] usb 1-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 12 20:13:47 RevPi43743 kernel: [ 5.428441] usb 1-1.5.2: Product: FT232R USB UART
Mar 12 20:13:47 RevPi43743 kernel: [ 5.428446] usb 1-1.5.2: Manufacturer: FTDI
Mar 12 20:13:47 RevPi43743 kernel: [ 5.428450] usb 1-1.5.2: SerialNumber: AV0JI82Y
Mar 12 20:13:47 RevPi43743 kernel: [ 5.531536] usb 1-1.5.3: new full-speed USB device number 7 using dwc2
Mar 12 20:13:47 RevPi43743 kernel: [ 5.667992] usb 1-1.5.3: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00
Mar 12 20:13:47 RevPi43743 kernel: [ 5.668006] usb 1-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 12 20:13:47 RevPi43743 kernel: [ 5.668012] usb 1-1.5.3: Product: FT232R USB UART
Mar 12 20:13:47 RevPi43743 kernel: [ 5.668017] usb 1-1.5.3: Manufacturer: FTDI
Mar 12 20:13:47 RevPi43743 kernel: [ 5.668021] usb 1-1.5.3: SerialNumber: AV0JI87R
Mar 12 20:13:47 RevPi43743 kernel: [ 5.844634] fuse: init (API version 7.37)
Mar 12 20:13:47 RevPi43743 kernel: [ 6.008873] i2c_dev: i2c /dev entries driver
Mar 12 20:13:47 RevPi43743 kernel: [ 6.366055] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
Mar 12 20:13:47 RevPi43743 kernel: [ 6.507724] piControl: loading out-of-tree module taints kernel.
Mar 12 20:13:47 RevPi43743 kernel: [ 6.515442] piControl: built: Tue Feb 6 15:16:29 UTC 2024
Mar 12 20:13:47 RevPi43743 kernel: [ 6.515460] piControl: RevPi Connect
Mar 12 20:13:47 RevPi43743 kernel: [ 6.515467] piControl: MAJOR-No. : 242
Mar 12 20:13:47 RevPi43743 kernel: [ 6.515931] piControl: MAJOR-No. : 242 MINOR-No. : 0
Mar 12 20:13:47 RevPi43743 kernel: [ 6.563220] piControl: read file finished, f_pos=9609
Mar 12 20:13:47 RevPi43743 kernel: [ 6.563296] piControl: 3 devices found
Mar 12 20:13:47 RevPi43743 kernel: [ 6.563301] piControl: 152 entries in total
Mar 12 20:13:47 RevPi43743 kernel: [ 6.563700] piControl: cl-comp: 0 addr 232 bit ff len 8
Mar 12 20:13:47 RevPi43743 kernel: [ 6.566113] piControl: set priority of spi0 to 54
Mar 12 20:13:47 RevPi43743 kernel: [ 6.566339] piControl: piIO thread started
Mar 12 20:13:47 RevPi43743 kernel: [ 6.566344] piControl: RevPiDevice_init()
Mar 12 20:13:47 RevPi43743 kernel: [ 6.566350] piControl: Enter Init State
Mar 12 20:13:47 RevPi43743 kernel: [ 6.566757] piControl: piControlInit done
Mar 12 20:13:47 RevPi43743 kernel: [ 6.566989] piControl: Enter PresentSignalling1 State
Mar 12 20:13:47 RevPi43743 kernel: [ 6.606121] piControl: Enter InitialSlaveDetectionLeft State
Mar 12 20:13:47 RevPi43743 kernel: [ 6.606666] piControl: Enter ConfigLeftStart State
Mar 12 20:13:47 RevPi43743 kernel: [ 6.617098] piControl: Enter ConfigDialogueLeft State
Mar 12 20:13:47 RevPi43743 kernel: [ 6.651578] piControl: GetDeviceInfo: Id 97
Mar 12 20:13:47 RevPi43743 kernel: [ 6.681556] piControl: found 2. device on left side. Moduletype 97. Designated address 31
Mar 12 20:13:47 RevPi43743 kernel: [ 6.681574] piControl: input offset 11 len 70
Mar 12 20:13:47 RevPi43743 kernel: [ 6.681578] piControl: output offset 81 len 18
Mar 12 20:13:47 RevPi43743 kernel: [ 6.682120] piControl: Enter SlaveDetectionLeft State
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692095] piControl: Enter EndOfConfig State
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692095]
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692105] piControl: Device 0: Addr 0 Type 105 Act 1 In 6 Out 5
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692115] piControl: input offset 0 len 6
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692118] piControl: output offset 6 len 5
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692121] piControl: serial number 1 version 1.0
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692126] piControl: Device 1: Addr 31 Type 97 Act 1 In 70 Out 18
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692132] piControl: input offset 11 len 70
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692144] piControl: output offset 81 len 18
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692148] piControl: serial number 49297 version 1.5
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692152] piControl:
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692160] piControl: Adjust: base 226 in 226 out 232 conf 0
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692165] piControl: Adjust: base 113 in 113 out 183 conf 201
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692172] piControl: After Adjustment
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692174] piControl: Device 0: Addr 0 Type 105 Act 1 In 6 Out 5
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692179] piControl: input offset 226 len 6
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692183] piControl: output offset 232 len 5
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692186] piControl: Device 1: Addr 31 Type 97 Act 1 In 70 Out 18
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692192] piControl: input offset 113 len 70
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692195] piControl: output offset 183 len 18
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692199] piControl: Device 2: Addr 30 Type 32865 Act 0 In 70 Out 18
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692204] piControl: input offset 0 len 70
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692208] piControl: output offset 70 len 18
Mar 12 20:13:47 RevPi43743 kernel: [ 6.692211] piControl:
Mar 12 20:13:47 RevPi43743 kernel: [ 6.811581] piControl: start data exchange
Mar 12 20:13:47 RevPi43743 kernel: [ 7.053720] piControl: piDIOComm_Init done 0
Mar 12 20:13:47 RevPi43743 kernel: [ 7.055540] piControl: initialization of module not finished (0,0,4) -> retry
Mar 12 20:13:47 RevPi43743 kernel: [ 7.056077] piControl: Enter Initialization Retry
Mar 12 20:13:47 RevPi43743 kernel: [ 9.391857] ks8851 spi0.1: supply vdd-io not found, using dummy regulator
Mar 12 20:13:47 RevPi43743 kernel: [ 9.501535] ks8851 spi0.1: message enable is 0
Mar 12 20:13:47 RevPi43743 kernel: [ 9.546028] ks8851 spi0.1 eth2: revision 1, MAC 4a:1d:fa:2d:cc:a1, IRQ 201, no EEPROM
Mar 12 20:13:47 RevPi43743 kernel: [ 9.605937] piControl: RevPiDevice_init()
Mar 12 20:13:47 RevPi43743 kernel: [ 9.606513] piControl: Enter Init State
Mar 12 20:13:47 RevPi43743 kernel: [ 9.607082] piControl: Enter PresentSignalling1 State
Mar 12 20:13:47 RevPi43743 kernel: [ 9.646434] piControl: Enter InitialSlaveDetectionLeft State
Mar 12 20:13:47 RevPi43743 kernel: [ 9.646979] piControl: Enter ConfigLeftStart State
Mar 12 20:13:47 RevPi43743 kernel: [ 9.657541] piControl: Enter ConfigDialogueLeft State
Mar 12 20:13:47 RevPi43743 kernel: [ 9.659254] pi-bridge serial0-0: invalid checksum (expected: 0x86, got 0x06)
Mar 12 20:13:47 RevPi43743 kernel: [ 9.659281] piControl: Error sending gate request: -74
Mar 12 20:13:47 RevPi43743 kernel: [ 9.681591] piControl: piIoComm_sendRS485Tel(GetDeviceInfo) failed -74
Mar 12 20:13:47 RevPi43743 kernel: [ 9.683891] pi-bridge serial0-0: invalid checksum (expected: 0x86, got 0x06)
Mar 12 20:13:47 RevPi43743 kernel: [ 9.683909] piControl: Error sending gate request: -74
Mar 12 20:13:47 RevPi43743 kernel: [ 9.711581] piControl: piIoComm_sendRS485Tel(GetDeviceInfo) failed -74
Mar 12 20:13:47 RevPi43743 kernel: [ 9.713970] pi-bridge serial0-0: invalid checksum (expected: 0x86, got 0x06)
Mar 12 20:13:47 RevPi43743 kernel: [ 9.713991] piControl: Error sending gate request: -74
Mar 12 20:13:47 RevPi43743 kernel: [ 9.741584] piControl: piIoComm_sendRS485Tel(GetDeviceInfo) failed -74
Mar 12 20:13:47 RevPi43743 kernel: [ 9.743863] pi-bridge serial0-0: invalid checksum (expected: 0x86, got 0x06)
Mar 12 20:13:47 RevPi43743 kernel: [ 9.743888] piControl: Error sending gate request: -74
Mar 12 20:13:47 RevPi43743 kernel: [ 9.771584] piControl: piIoComm_sendRS485Tel(GetDeviceInfo) failed -74
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772141] piControl: Enter EndOfConfig State
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772141]
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772147] piControl: Device 0: Addr 0 Type 105 Act 1 In 6 Out 5
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772155] piControl: input offset 0 len 6
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772158] piControl: output offset 6 len 5
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772162] piControl: serial number 1 version 1.0
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772166] piControl:
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772177] piControl: Adjust: base 226 in 226 out 232 conf 0
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772185] piControl: After Adjustment
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772188] piControl: Device 0: Addr 0 Type 105 Act 1 In 6 Out 5
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772193] piControl: input offset 226 len 6
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772197] piControl: output offset 232 len 5
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772200] piControl: Device 1: Addr 30 Type 32865 Act 0 In 70 Out 18
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772206] piControl: input offset 0 len 70
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772210] piControl: output offset 70 len 18
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772219] piControl: Device 2: Addr 31 Type 32865 Act 0 In 70 Out 18
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772232] piControl: input offset 113 len 70
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772235] piControl: output offset 183 len 18
Mar 12 20:13:47 RevPi43743 kernel: [ 9.772239] piControl:
Mar 12 20:13:47 RevPi43743 kernel: [ 9.891555] piControl: start data exchange
Mar 12 20:13:47 RevPi43743 kernel: [ 10.019812] mc: Linux media interface: v0.10
Mar 12 20:13:47 RevPi43743 kernel: [ 10.072648] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Mar 12 20:13:47 RevPi43743 kernel: [ 10.074519] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Mar 12 20:13:47 RevPi43743 kernel: [ 10.074538] [vc_sm_connected_init]: start
Mar 12 20:13:47 RevPi43743 kernel: [ 10.084811] [vc_sm_connected_init]: installed successfully
Mar 12 20:13:47 RevPi43743 kernel: [ 10.131554] piControl: set BridgeState to running
Mar 12 20:13:47 RevPi43743 kernel: [ 10.136098] videodev: Linux video capture interface: v2.00
Mar 12 20:13:47 RevPi43743 kernel: [ 10.149118] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
Mar 12 20:13:47 RevPi43743 kernel: [ 10.215994] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Mar 12 20:13:47 RevPi43743 kernel: [ 10.217189] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Mar 12 20:13:47 RevPi43743 kernel: [ 10.226796] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Mar 12 20:13:47 RevPi43743 kernel: [ 10.231003] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
Mar 12 20:13:47 RevPi43743 kernel: [ 10.242219] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
Mar 12 20:13:47 RevPi43743 kernel: [ 10.242787] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
Mar 12 20:13:47 RevPi43743 kernel: [ 10.243577] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
Mar 12 20:13:47 RevPi43743 kernel: [ 10.244085] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
Mar 12 20:13:47 RevPi43743 kernel: [ 10.244110] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
Mar 12 20:13:47 RevPi43743 kernel: [ 10.244124] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
Mar 12 20:13:47 RevPi43743 kernel: [ 10.244159] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
Mar 12 20:13:47 RevPi43743 kernel: [ 10.244170] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
Mar 12 20:13:47 RevPi43743 kernel: [ 10.248204] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Mar 12 20:13:47 RevPi43743 kernel: [ 10.249089] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
Mar 12 20:13:47 RevPi43743 kernel: [ 10.249580] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
Mar 12 20:13:47 RevPi43743 kernel: [ 10.250080] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
Mar 12 20:13:47 RevPi43743 kernel: [ 10.250448] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
Mar 12 20:13:47 RevPi43743 kernel: [ 10.250472] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
Mar 12 20:13:47 RevPi43743 kernel: [ 10.250487] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
Mar 12 20:13:47 RevPi43743 kernel: [ 10.250499] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
Mar 12 20:13:47 RevPi43743 kernel: [ 10.250511] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
Mar 12 20:13:47 RevPi43743 kernel: [ 10.250855] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
Mar 12 20:13:47 RevPi43743 kernel: [ 10.258271] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Mar 12 20:13:47 RevPi43743 kernel: [ 10.270004] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Mar 12 20:13:47 RevPi43743 kernel: [ 10.270048] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Mar 12 20:13:47 RevPi43743 kernel: [ 10.274523] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Mar 12 20:13:47 RevPi43743 kernel: [ 10.274568] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Mar 12 20:13:47 RevPi43743 kernel: [ 10.277877] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Mar 12 20:13:47 RevPi43743 kernel: [ 10.277913] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Mar 12 20:13:47 RevPi43743 kernel: [ 10.283017] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
Mar 12 20:13:47 RevPi43743 kernel: [ 10.283351] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
Mar 12 20:13:47 RevPi43743 kernel: [ 10.293267] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
Mar 12 20:13:47 RevPi43743 kernel: [ 10.293315] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
Mar 12 20:13:47 RevPi43743 kernel: [ 10.523986] bcm2835_audio bcm2835_audio: card created with 8 channels
Mar 12 20:13:47 RevPi43743 kernel: [ 11.147423] usbcore: registered new interface driver usbserial_generic
Mar 12 20:13:47 RevPi43743 kernel: [ 11.147493] usbserial: USB Serial support registered for generic
Mar 12 20:13:47 RevPi43743 kernel: [ 11.190258] usbcore: registered new interface driver ftdi_sio
Mar 12 20:13:47 RevPi43743 kernel: [ 11.190466] usbserial: USB Serial support registered for FTDI USB Serial Device
Mar 12 20:13:47 RevPi43743 kernel: [ 11.190709] ftdi_sio 1-1.5.2:1.0: FTDI USB Serial Device converter detected
Mar 12 20:13:47 RevPi43743 kernel: [ 11.190952] usb 1-1.5.2: Detected FT232R
Mar 12 20:13:47 RevPi43743 kernel: [ 11.206299] usb 1-1.5.2: FTDI USB Serial Device converter now attached to ttyUSB0
Mar 12 20:13:47 RevPi43743 kernel: [ 11.207544] ftdi_sio 1-1.5.3:1.0: FTDI USB Serial Device converter detected
Mar 12 20:13:47 RevPi43743 kernel: [ 11.207759] usb 1-1.5.3: Detected FT232R
Mar 12 20:13:47 RevPi43743 kernel: [ 11.221623] usb 1-1.5.3: FTDI USB Serial Device converter now attached to ttyUSB1
Mar 12 20:13:49 RevPi43743 kernel: [ 14.564702] ks8851 spi0.1 pileft: renamed from eth2
Mar 12 20:13:49 RevPi43743 kernel: [ 15.087453] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Mar 12 20:13:49 RevPi43743 kernel: [ 15.091394] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
Mar 12 20:13:49 RevPi43743 kernel: [ 15.097905] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mar 12 20:13:49 RevPi43743 kernel: [ 15.179170] smsc95xx 1-1.5.1:1.0 eth1: hardware isn't capable of remote wakeup
Mar 12 20:13:49 RevPi43743 kernel: [ 15.187034] smsc95xx 1-1.5.1:1.0 eth1: Link is Down
Mar 12 20:13:55 RevPi43743 kernel: [ 21.417314] capability: warning: `zerotier-one' uses 32-bit capabilities (legacy support in use)
Mar 12 20:13:56 RevPi43743 kernel: [ 21.718110] tun: Universal TUN/TAP device driver, 1.6

Thanks. From the kernel log I can see that there is a communication problem (crc error). Which firmware and hardware revison do the modules have (numbers left of the IO connector or scan the dcm with for example your mobile)?

RevPi DI modules
product number SKU 100195
serial numbers: 46688, 49297
revisions 1.3

Update: after reviewing the module firmware update procedure here
https://revolutionpi.com/en/tutorials/i ... are-update

I started a clean PiCtory config and added a single DI module.

piTest reports success Adding the second DI module then breaks the setup as before...

I have confirmed the first-to-the-left DI module is functioning correctly with LED indications and piTest -d command.

I have removed the functioning DI module from the chain/bridge and have placed the second DI module (that is flashing red power LED) in the first-to-the-left position. Clean PiCtory project, load start-config, reset driver. DI module not responding: please advise...

Hi,

look like an compatibility problem with an older firmware version on the DI. Do you remember which version was present before you did the update on the working DI module? I'd like to try to reproduce the issue at our lab.

Regarding the other DI module: Do you have another RevPi / can install an older image on your Connect and try the firmware update there?

Nicolai

Taking the non-working DI module home to test on bench... will update then.

Tested DI module with my bench Core 3+ Bullseye, same result. Reverted image to Stretch, which then was able to detect the DI module... conclusion, DI module with v1.4 firmware will not communicate with Bullseye image.