Location of Connect 4 "Watchdog Jumper"?

Topics about the Hardware of Revolution Pi
Post Reply
lifeofaboat0
Posts: 1
Joined: 17 Feb 2024, 16:44

Location of Connect 4 "Watchdog Jumper"?

Post by lifeofaboat0 »

We are interested in loading a new image on the RevPi Connect 4, and I see references to a "watchdog jumper" that needs to be removed (disabling the watchdog) in order to flash the eMMC via the USB port on the front...is there documentation hiding somewhere showing where this is located, and how to access it? Once the image is flashed, assuming that it is good practice to remove the jumper (enabling the watchdog)?
User avatar
p.rosenberger
Posts: 91
Joined: 03 Jul 2020, 11:07

Re: Location of Connect 4 "Watchdog Jumper"?

Post by p.rosenberger »

The RevPi Connect 4 has no watchdog jumper anymore. The watchdog jumper was needed on older Connect models.

Best regards,
Philipp
Post Reply