Page 1 of 1
RevPi communicates with Siemens PLC via S7
Posted: 17 Nov 2022, 02:39
by Purecade
Hello,
Does RevPi support S7 protocol and communicate with Siemens PLC?
Best regards,
Cade
Re: RevPi communicates with Siemens PLC via S7
Posted: 17 Nov 2022, 11:42
by giuseppe
Hello Cade,
The Siemens s7 is available in different variants. Is there a specific protocol you are referring to?
We have this gateway available.
KUNBUS Modular Gateway
- Modulare Gateway for industrial networks.png (122.1 KiB) Viewed 3334 times
Note: All GW are slave modules
Additional information:
Modular Gateway FAQ
RevolutionPi Gateway Tutorial
Best regards
Giuseppe Pagano
Re: RevPi communicates with Siemens PLC via S7
Posted: 19 Nov 2022, 05:23
by Purecade
Hello,
we need to combine these gateway modules to be able to communicate with Siemens PLC via S7 protocol?
Best regards,
Cade
Re: RevPi communicates with Siemens PLC via S7
Posted: 23 Nov 2022, 09:32
by giuseppe
Hello Cade,
we need to combine these gateway modules to be able to communicate with Siemens PLC via S7 protocol?
The S7 protocol can run on Profibus. But this should be checked again beforehand.
In the following link, you will find how to use the Modular GW.
https://kunbus-gmbh.atlassian.net/servi ... 2843508848
there are also some tutorials linked.
Best regards
Giuseppe Pagano