Page 1 of 1

/var/www/revpi/pictory/projects/_config.rsc file is empty in RevPI Flat

Posted: 19 Aug 2022, 08:25
by darkangel
The /var/www/revpi/pictory/projects/_config.rsc file is empty in my RevPI-Flat.
Is this normal?

Re: /var/www/revpi/pictory/projects/_config.rsc file is empty in RevPI Flat

Posted: 19 Aug 2022, 09:01
by nicolaiB
If there hasn't been any configuration by the end-user in Pitory: Yes this is normal.

- Nicolai

Re: /var/www/revpi/pictory/projects/_config.rsc file is empty in RevPI Flat

Posted: 22 Aug 2022, 07:14
by darkangel
nicolaiB wrote: 19 Aug 2022, 09:01 If there hasn't been any configuration by the end-user in Pitory: Yes this is normal.

- Nicolai
Hi Nicolai,
Thank you for your response.
I was expecting the file to contain basic stuff, such as the device UUID and the LEDs mapped.
Is there anyplace I could get these info., so that I can update the _config.rsc?

Re: /var/www/revpi/pictory/projects/_config.rsc file is empty in RevPI Flat

Posted: 22 Aug 2022, 10:10
by nicolaiB
The configuration is usually done via Pictory. You can find a tutorial in our documentation: https://revolutionpi.com/tutorials/was- ... rect=en_US

-Nicolai

Re: /var/www/revpi/pictory/projects/_config.rsc file is empty in RevPI Flat

Posted: 23 Aug 2022, 05:13
by darkangel
nicolaiB wrote: 22 Aug 2022, 10:10 The configuration is usually done via Pictory. You can find a tutorial in our documentation: https://revolutionpi.com/tutorials/was- ... rect=en_US

-Nicolai
Thank you, Nicolai. I will go through it.