Page 1 of 1

Encoder frequency

Posted: 18 May 2022, 10:32
by bdekramer
I found that the maximum frequency for an encoder on a DIO module is 500Hz. My encoder has a maximum frequency of 4500Hz, and when running on max frequency, I can see of course that a lot of pulses are lost.
Is there any change to capture this higher frequency with the DIO module, or another module? Or should I look for an encoder with less pulses per revolution?

Re: Encoder frequency

Posted: 19 May 2022, 11:06
by u.biakoup
Hello,

The maximum frequency for our modul is limited to 500 Hz encoder sequence. We cannot have or deliver module with higher Frequency. For further Information, please a look here: https://revolutionpi.com/tutorials/down ... enblaetter.

Best Regards

Ulrich Kouatang Biakoup | Technical Support