The Industrial Raspberry Pi Forum

Posted: **31 Mar 2022, 20:58**

I have configured a Virtual Modbus TCP Matser device in Pictory according to the tutorial of this website. When I check the device list in the Revpi shell with piTest -d only the RevPi core module is found. This is the same case for any addtional device I configure in pictory. I have booted a new buster image and updated the system and the same problem occures. I can write to the LEDs on the RevPi Core 3 device but not to the outputs of the Modbus Master device. What could be the problem source?

Posted: **07 Apr 2022, 08:32**

Hello,
have you saved the configuration and reset the driver, as shown in then images below?

: Save; 2022-04-07 08_23_50-PiCtory - 2.0.4 - Brave.png (12.36 KiB) Viewed 2413 times

: Reset; 2022-04-07 08_24_30-PiCtory - 2.0.4 - Brave.png (12.57 KiB) Viewed 2413 times

I hope I could help you

Mit freundlichen Grüßen | Best regards
Giuseppe Pagano | Technical Support

The Industrial Raspberry Pi Forum

in pictory configured devices not found

in pictory configured devices not found

Re: in pictory configured devices not found