in pictory configured devices not found

Topics about the Hardware of Revolution Pi
Post Reply
9696
Posts: 1
Joined: 31 Mar 2022, 12:46

in pictory configured devices not found

Post by 9696 »

I have configured a Virtual Modbus TCP Matser device in Pictory according to the tutorial of this website. When I check the device list in the Revpi shell with piTest -d only the RevPi core module is found. This is the same case for any addtional device I configure in pictory. I have booted a new buster image and updated the system and the same problem occures. I can write to the LEDs on the RevPi Core 3 device but not to the outputs of the Modbus Master device. What could be the problem source?
Top
giuseppe
KUNBUS
Posts: 91
Joined: 09 Mar 2022, 13:08

Re: in pictory configured devices not found

Post by giuseppe »

Hello,
have you saved the configuration and reset the driver, as shown in then images below?
Save
Save
2022-04-07 08_23_50-PiCtory - 2.0.4 - Brave.png (12.36 KiB) Viewed 2411 times
Reset
Reset
2022-04-07 08_24_30-PiCtory - 2.0.4 - Brave.png (12.57 KiB) Viewed 2411 times
I hope I could help you

Mit freundlichen Grüßen | Best regards
Giuseppe Pagano | Technical Support
Top
Post Reply

Return to “Hardware”