Page 1 of 1

Type of the case, connector and PCB outline of the 22,5mm module

Posted: 26 Jan 2022, 08:48
by b.kolodziej
Hi all

In my new project I would like to develop a custom module, compatible in the dimensions with the standard DIO RevPi module. Where can I get any informations of the DIN rail case model that is used in the standard 22,5mm DIO RevPi module? Any informations about the case type and 10-pin top connector will be very useful.

Greetings
Bartek

Re: Type of the case, connector and PCB outline of the 22,5mm module

Posted: 26 Jan 2022, 09:54
by nicolaiB
Hi Bartek,

you can find the step files of our modules at our download page: https://revolutionpi.com/tutorials/down ... rect=en_US
The connector is a Phoenix Contact FMC 1,5.

Hope this helps,
Nicolai

Re: Type of the case, connector and PCB outline of the 22,5mm module

Posted: 26 Jan 2022, 10:33
by pi_admin
Hi Bartek,

in addition to Nicolai`s answer:

the 22,5mm (as well as the 45mm) case is designed by us/one of our business partner and can only be purchased from us or one of our distributors. We offer a so called "Maker-Set" which includes all necessary (housing)-parts and connectors to build your own expansion module:

https://revolutionpi.de/shop/en/maker-set

Due to the temporary closing of our online-shops, please get directly in touch with our sales team at sales@kunbus.com if you are interested in purchasing this set.