Two major issues: RevPi Connect + with dead ports, and update failures
Posted: 30 Dec 2021, 14:23
Hello All,
FIRST MAJOR ISSUE:
I bought 4 of the RevPi Connect + to use for OEM. 3 of them work as expected. The 4th one seems to have dead ports. By dead, I mean DEAD. Upon boot, 1) I can't use a keyboard 2) the ethernet ports will not indicate any lights (if and when I plug into it), and 3) I can't connect to the micro USB host port. Totally dead. Yes, I've tried RPIboot, but it does not see this RevPi. I presume I just need to swap it out for one that works. Do I do that through the distributor or do I send it straight back to you?
SECOND MAJOR ISSUE:
Btw, at setup with the desktop, it asks me to check for updates. I've done it twice now...and both times, the resulting install crashed my RevPi (there is a message about a script error for logi/rts). It won't boot, but I am able to recover it with RPiboot. This is a pretty frustrating out-of-the box experience.
FIRST MAJOR ISSUE:
I bought 4 of the RevPi Connect + to use for OEM. 3 of them work as expected. The 4th one seems to have dead ports. By dead, I mean DEAD. Upon boot, 1) I can't use a keyboard 2) the ethernet ports will not indicate any lights (if and when I plug into it), and 3) I can't connect to the micro USB host port. Totally dead. Yes, I've tried RPIboot, but it does not see this RevPi. I presume I just need to swap it out for one that works. Do I do that through the distributor or do I send it straight back to you?
SECOND MAJOR ISSUE:
Btw, at setup with the desktop, it asks me to check for updates. I've done it twice now...and both times, the resulting install crashed my RevPi (there is a message about a script error for logi/rts). It won't boot, but I am able to recover it with RPiboot. This is a pretty frustrating out-of-the box experience.