The Industrial Raspberry Pi Forum

What is the factory default IP address ? Device isn't responding to Codesys IDE 'Scan Network'

Hi Rory,

the RevPi uses DHCP by default and therefore will optain a free IP from the range your DHCP server/router is announcing. Usually you can lookup the connected devices in your router web interface. If this is not possible I would suggest two alternative solutions:

a) Use the name of the RevPi, which is RevPi + Serial (e.g. RevPi4233). The serial can be found on the device front (second row right of the lower data matrix code)
b) Use an IP scanner like https://www.advanced-ip-scanner.com/ to discover the device

Nicolai

Hi Nicolai,

Thanks, I changed to DHCP and I was able to discover the device and login. I'm trying to connect to the webvisu, Is it possible to assign a static IP address?

Kind Regards,

Hi Rory,

have a look at the "Tutorial 07 – Static IP Adress".

Nicolai