Page 1 of 1

M-Bus + Codesys?

Posted: 17 Sep 2021, 08:23
by User Name
I've read that the Connect+ feat. Codesys does not support the M-Bus module. Any chance to get meter readings into the Connect+ and Codesys, maybe through a workaround?
And can someone explain why this restriction applies? I've found a Wago solution which allows to seeing M-Bus data via Codesys,.

Thanks!

Re: M-Bus + Codesys?

Posted: 11 Oct 2021, 12:37
by ->Johannes<-
Hi user,

what makes you think that? Where did you read this?

The M-Bus gateway exists in our library, attached is an example:
2021-10-11 12_36_14-CANOpen Test.project_ - CODESYS.png
2021-10-11 12_36_14-CANOpen Test.project_ - CODESYS.png (17.4 KiB) Viewed 4611 times
Regards

Johannes

Re: M-Bus + Codesys?

Posted: 07 Dec 2021, 10:06
by User Name
Sorry for the late feedback.
Please see here: https://revolutionpi.de/revpi-connect-codesys/
It says:
* keine RevPi Con MBus (Artikelnr.: 100281) und RevPi Con MBus VHP Gateway (Artikelnr.: 100282) Unterstützung.
Also, have a look here: https://revolutionpi.de/shop/de/mbus-module
The field of compatible extension modules does not list the M-Bus device.


I also checked it out in Codesys, I can't find any options to add it:
Image


Image

Re: M-Bus + Codesys?

Posted: 09 Dec 2021, 21:44
by nicolaiB
Hi Dirk,

Do you already have enabled the mbus module in the webinterface and updated the module setup in pictory? If not, please have look at our tutorial section.

Nicolai