Page 1 of 1

RevPI Flat - analog input voltage resistance

Posted: 08 Sep 2021, 15:52
by Kevin
Hello, I am using a Revolution PI Flat. I currently have the need to check a 12v dc power supply.
There is no need for knowing the exact voltage. I just need to know if a voltage is available or not.

Is it possible to connect it to the 0-10 volt analog input without breaking it? I can not find any specifications about the voltage resistance of the analog input.


Best regards
Kevin

Re: RevPI Flat - analog input voltage resistance

Posted: 22 Oct 2021, 14:53
by ->Johannes<-
Hi Kevin,

Yes, the analogue input can withstand 12 volts.

Regards

Johannes