Using Relay Contact on RevPi Connect
Posted: 07 Jul 2021, 15:29
Hi,
there were multiple questions regarding the use of the relay contact of the RevPi Connect.
It is controlled via the 6th bit of RevPiLED in the process image.
Here's some details:
The binary flags can be combined like this:
Usage example:
Log on to revolution pi via ssh.
Kind reagrds,
Boris
there were multiple questions regarding the use of the relay contact of the RevPi Connect.
It is controlled via the 6th bit of RevPiLED in the process image.
Here's some details:
Code: Select all
BIN DEC DESCRIPTION
00000000 0 all off
00000001 1 LED A1 green
00000010 2 LED A1 red
00000011 3 LED A1 orange (red + green)
00000100 4 LED A2 green
00001000 8 LED A2 red
00001100 12 LED A2 orange (red + green)
00100000 32 Relay Contact
The binary flags can be combined like this:
Code: Select all
DEC 256|128|64|32|16| 8| 4| 2| 1
BIN 0| 0| 0| 1| 0| 0| 0| 0| 1 = 33 LED A1 green + relay contact active
32 + 1 = 33
Usage example:
Log on to revolution pi via ssh.
Code: Select all
cd demo
piTest -w RevPiLED,33
Kind reagrds,
Boris