The Industrial Raspberry Pi Forum

Hello everybody,
I have to set up a project that makes communication between RevPi Core / Connect and I / O module more secure. The basic idea is to use data diodes as hardware or proxies, firewalls as software that only allows specific data flows via PiBridge (RS 485 and Ethernet). To do this, I need to know which data is being transmitted, when and in which direction between RevPi devices via RS 485 and Ethernet. So I really want to have the communication protocol of RevPi devices. Can someone help me please? Any help will be appciciated.

Thanks in advance,
Ha

Hi Ha,

You have the option of creating your own image.

Image Bakery

The circuit diagrams of the Core/Connect and the I/O modules can be found here.

Downloads

Chapter: Circuit diagrams

Best regards

Johannes

Hi songha, all the details about the piControl communication is available here:
https://github.com/RevolutionPi/piControl
The pinning of the PiBridge is available here:
https://revolution.kunbus.com/tutorials ... rect=en_US