Issue with the HDMI and LAN connection.
Posted: 29 Jun 2021, 13:55
Hello,
In addition to the boot drive issue (link:- viewtopic.php?f=3&t=2932), there are 2 more problems I am facing with my 2 RevPi's,
1) When I connect the RevPi to the monitor using the HDMI cable, it boots till a particular point and stops and again reboots till the same point. I have attached the image for better reference. I used different sets of HDMI cables also. But to no luck. 2) Similarly when I connect the RevPi using the LAN to the DHCP router, the IP address of the RevPi is not detected. Hence the connection to the RevPi using SSH connection is also not possible. I used the Advanced IP scanner as well as the TP-Link server to check for the IP address of the RevPi.
Please let me know what is the issue with the 2 RevPi's I have.
Thanks and Regards
Shreyash Kulkarni
In addition to the boot drive issue (link:- viewtopic.php?f=3&t=2932), there are 2 more problems I am facing with my 2 RevPi's,
1) When I connect the RevPi to the monitor using the HDMI cable, it boots till a particular point and stops and again reboots till the same point. I have attached the image for better reference. I used different sets of HDMI cables also. But to no luck. 2) Similarly when I connect the RevPi using the LAN to the DHCP router, the IP address of the RevPi is not detected. Hence the connection to the RevPi using SSH connection is also not possible. I used the Advanced IP scanner as well as the TP-Link server to check for the IP address of the RevPi.
Please let me know what is the issue with the 2 RevPi's I have.
Thanks and Regards
Shreyash Kulkarni