The Industrial Raspberry Pi Forum

I will connect the RevPi Flat to a router using a WIFI antenna.
I will connect two different devices to the RevPi Flat which will be on separate subnets using LAN0 and LAN1.
Device one will have a static IP (machine network) and be connected to LAN1. My question is, can I connect device two to LAN0 and achieve some kind of a bridge connect to the wifi so that device can access the internet?

Thank you,

Hi Sairakcaz,

I found a link to your topic
raspberry-pi-wifi-ethernet-bridge
I have used Option 2 - Separate Subnet:
I used a RevPi Connect as your "RevPi Flat" and a RevPi Core as your "device two". This works for me.

You must of course modify the script to suit for your situation.
With the note: Use at your own responsibility

Best regards
Johannes