Page 1 of 1
regarding the torque value to fasten the connectors
Posted: 16 Feb 2021, 04:22
by Wang
hi, our Japanese customer is using RevPi Core3 in their projects, and they would like to know the torque value to fasten the x4 power supply connectors.
Many thanks in advance.
Re: regarding the torque value to fasten the connectors
Posted: 18 Feb 2021, 08:42
by ->Johannes<-
Hi Wang,
according to the
datasheet :
Tightening torque SEV:
0.6 Nm
Tightening torque UL:
5.3 lb-in
Best regards,
Johannes
Re: regarding the torque value to fasten the connectors
Posted: 18 Feb 2021, 09:07
by Wang
Thank you for your information.
->Johannes<- wrote: ↑18 Feb 2021, 08:42
Hi Wang,
according to the
datasheet :
Tightening torque SEV:
0.6 Nm
Tightening torque UL:
5.3 lb-in
Best regards,
Johannes