The Industrial Raspberry Pi Forum

I'm Jordi (Spain), an electronic engineering student, and I'm doing my final engineering project.
I have to establish communication via profinet between RevPi (KunBus) and an ABB PLC (Codesys).
I have to send the status of inputs and outputs from the ABB PLC to RevPi and implement a Scada/HMI program to display in RevPi on the screen.
To create the profinet network, I don't have to use Codesys, I need another program.
RevPi (Master) and PLC ABB (Slave). I have the profinet modules from RevPi and ABB.
Which programs can be installed in RevPi to create a profinet communication? I to visualize the data received by screen (Scada)?
Thank you very much in advance.

Hi Jordi,
You can refer to User manual for setting up the Gateway module PROFINET IRT Slave:
https://www.kunbus.com/profinet-irt-gateway-module.html

Configure RevPi Gate for PROFINET
https://revolution.kunbus.com/tutorials ... -profinet/

Configure the RevPi Core/Connect in pictory
https://revolution.kunbus.com/tutorials ... art-guide/

Access Process image with program such as piTest
https://revolution.kunbus.com/tutorials ... -2/pitest/

Some GUI options for SCADA
https://www.gtk.org/docs/installations/linux
https://projects.raspberrypi.org/en/pro ... ith-guis/1

Regards,
Amar

Hello Amar,

Thank you very much for your answer, I think you have helped me a lot.
If anyone else knows anything else, please let them know.

Greetings
Jordi