Page 1 of 1
Revpi connect+ customisations
Posted: 07 Oct 2020, 20:44
by andy67
Hello,
Can I remove the card from the box and build my own enclosure ?
I want to build a product with onboard LTE connectivity and a custom dashboard on top of pictory, which leads to the second question: Can I customize pictory with my own brand ?
Best regards
Re: Revpi connect+ customisations
Posted: 08 Oct 2020, 13:35
by dirk
Hi andy67, have a look at the
Maker-Set.
Re: Revpi connect+ customisations
Posted: 08 Oct 2020, 14:39
by andy67
EXCELLENT !!
Thank you for this fast reply.
And for the legal inscriptions and revpi logo ? Can i put my own logo and inscriptions on the maker set ?
And what about pictory ? Can the interface be freely edited ?
Re: Revpi connect+ customisations
Posted: 09 Oct 2020, 08:54
by dirk
Hi have a look at
OEM Branding? No Problem!.
I have forwarded your request to our product management board. PiCtory has a proprietary license.
Re: Revpi connect+ customisations
Posted: 12 Oct 2020, 17:01
by dirk
Hi andy67, after a chat with our product management I have the following answers for you:
Housing - We can currently only perform final testing of the boards with housing.
Our approvals expire if the device is operated without this housing.
If a similar housing is used, the chance is quite high that the certification can still be passed.
PiCtory - Currently not open source and we are not planning to take further steps in this direction.