The Industrial Raspberry Pi Forum

I want to install a new image for my RevPi Core module. I failed step by stpe from your tutorial.I tried both Jessie and Strench so many times,but I can't boot my RevPi after that processing.I can find IP address from Advanced IP Scanner but its status is shutdown all the time.And I can't launch it by putty.The A1 Led interface is red all the time.

Fortunately,I backup the whole image/system before I UPLOAD THE NEW IMAGE,and I can boot by my backup.

So I need your suggestion,

Thanks sincerely.

Problem solved!
The red light doesn't matter. If I install a new image for my RevPi Core, its IP adress changed and the manufacturer displayed in the advanced ip scanner changed too!!! The manufacturer is "Raspberry Pi Foundation" now.

Hi thank you for your positive feedback.