The Industrial Raspberry Pi Forum

Hi,

Are the schematics available for the serial gateways?
Mainly interested in the Fieldbus Gateway.

The manual reads that Pin 1 is 5V fused, but can't find any info on how much current it can source, nor if the supply out is isolated.


Thanks

Hi jobijobi, unfortunately the Gateway Modules are not part of the open source products. The Gateway Modules existed before the beginning of RevPi as a separate product, here: https://www.kunbus.com/modular-gateways.html
I'll review the question about the isolation here and come back to you.

Hi, here is the info about isolation
Pin1 = 5V isolated
Pin4 = Gnd isolated
Imax = 100mA fused by a PTC