Good afternoon!
I am currently setting up a small lab for a project, and I have a couple of questions regarding your products. Without getting bogged down in the details, I want to set up two industrial raspberry pi’s and connect them such that they can communicate with UDP over IP. The idea was to use two RevPi Connect+'s, connect them directly with an ethernet cable with static IP addresses. Then I planned to access them over SSH on the other ethernet ports via the office network.
For this, I figured that I needed 2x Revolution Pi Connect+. But I am wondering whether AC to DC adapters and cables/connectors are included with this product?
Thanks
Setup for RevPi Connect+
Hi Isth, well you may use the Modbus functionality to communicate between the two RevPis. Have a look at the video tutorials:
- Tutorial 20 – Modbus TCP Master
- Tutorial 22 – Modbus TCP Slave
- Tutorial 21 – Modbus RTU Master
- Tutorial 23 – Modbus RTU Slave
