The Industrial Raspberry Pi Forum

I came across CODESYS runtime for RasPi while browsing CODESYS packages and as I understand it, it turns a RasPi into a PLC so you can use IEC programming languages on it.

"The CODESYS Control SoftPLC runtime system. It converts any embedded or PC-based device into an IEC 61131-3-compliant industrial controller. "
I am wondering if anyone has experience with this?

Hi SebastianSamuel, within the next months we will be able to provide a new "Codesys-RevPi" product - the name may differ.
Until this is not yet finished you may use the free "RevPiLib" library, here https://revolution.kunbus.com/tutorials ... einbinden/

Just to state this clear - we are waiting for an update from Codesys here as the runtime has a bug which was pointed out by our new implementation.

Hello,

Yes we have. Any question ?

Hi gian, I could not understand what you mean by 'yes we have'.

Hello,
I mean that we have enough experience concerning Runtime Codesys on RasPi. We're using RevPi & Codesys for our special applications.
Typical configuration :

- RevPi Connect (2 bridged Eth ports)
- DIO
- RS485
- WiFi over USB

Protocols :
- Mbus TCP And/Or Profinet
- Mbus Rtu
- Ethercat