How to load licence of image and MAC Address in RevPi ?

Topics about the Software of Revolution Pi
Post Reply
Anil
Posts: 41
Joined: 24 Jul 2019, 09:13

How to load licence of image and MAC Address in RevPi ?

Post by Anil »

Hello, kunbus team,
We have a solution to load the image in RevPi. The next step is to load the MAC address and the license of the image using the product key of RevPi.
To load both MAC address and Product key some "Maintenance application" is used.
from where we will get that maintenance application tool? As shown in the attached image.
Attachments
license .png
license .png (67.88 KiB) Viewed 5387 times
User avatar
dirk
KUNBUS
Posts: 2174
Joined: 15 Dec 2016, 13:19

Re: How to load licence of image and MAC Address in RevPi ?

Post by dirk »

Dear Anil, I am not able to understand what you need? We at KUNBUS here do a end of line test which involves scanning the QR codes on the front of the devices. There you find the MAC address, the serial number and the product number. There is a tool "revpi-factory-reset" which is automatically started on first login after flashing the image of the device. Have a look at the Tutorial "How to Safe and Install a new Image" for details about the QR code etc.
Anil
Posts: 41
Joined: 24 Jul 2019, 09:13

Re: How to load licence of image and MAC Address in RevPi ?

Post by Anil »

Dirk, Thanks for the response
Does the image which we flash in the Revpi device has the license? If So how to load the license?
User avatar
dirk
KUNBUS
Posts: 2174
Joined: 15 Dec 2016, 13:19

Re: How to load licence of image and MAC Address in RevPi ?

Post by dirk »

There must be some misunderstanding here. Ok what license are you expecting here? The RevPi images that we are providing in our shop are currently for free. There is just the need to factory reset the devices after flashing the image so that the right device (Core or Connect), the MAC address and the initial password on the sticker are applied.
Post Reply