Page 1 of 1

Regarding the micro-Usb port

Posted: 14 Oct 2019, 15:04
by Fredrik
Hello!
I have a question regarding the micro-Usb port located at the front of the RevPi Core.
Is it possible to use this from the system itself?
I would like to emulate a mass-storage device via kernel driver g_mass_storage.
I understand this is not it's intended use but I would like to know if it's technically possible.
Maybe like partitioning the eMMC to have one partition acting as mass storage while the system is running
from another partition?

Re: Regarding the micro-Usb port

Posted: 04 Nov 2019, 11:18
by dirk
Hi Fredrik, have a look at the schematics in the Downloads section.