The Industrial Raspberry Pi Forum

Hello, kunbus team,

The requirement is to go from M-Bus(BYU meter) to Profinet (S7-1200-PLC Simens).

Do we have a direct communication facility using RevPi Connect and Gateway component for PROFINET
?

Hello ,
Also M-Bus (BYU meter) to Modbus (S7-1200 PLC siemens)

Hello Ashish, yes this is possible with the folowing configuration:

• 1 RevPi Connect Module or Connect + Module
• 1 RevPi Gate PROFINET IRT Slave
• 1 Con M-Bus Module
  RevPi Con M-Bus
  https://revolution.kunbus.de/shop/en/mbus-module
  868MHz
  OR
  RevPi Con M-Bus VHP
  https://revolution.kunbus.de/shop/en/wi ... mhz-module
  169MHz

There are two different Con M-Bus Modules available that have different frequencies.