Page 1 of 1

Pi becomes unresponsive after a while.

Posted: 28 Aug 2019, 11:03
by Truos
I have a RevPi Connect with 2 DIO modules.
On the device Node Red is running.
The same Node Red project part from the Nodes handling DIO and PiCtory.

After running for a few hours the whole system freezes and it stops responding completely.
Even the console stops and freezes. It responds to ping but not SSH.

Is there any logs I can look through to try to figure out what is happening?

Re: Pi becomes unresponsive after a while.

Posted: 30 Aug 2019, 07:47
by Truos
It is the same hardware that had the problem in this post. But I did update to latest software.
viewtopic.php?f=6&t=1214&p=5327#p5327