Core 3 only powers on in boot mode
Posted: 27 Aug 2019, 09:02
Hi,
I have Core 3 and I wanted to flash new image. I tried two different raspbian lites (Buster 2019-07-10 and Strech 2018-11-13). With microUSB connected, Power LED is on and I can flash new image successfully. When I power down the Core 3 and remove microUSB and power back up, stays the Power LED off (and all the other LEDs as well, even ethernet). No video feed is displayed. I used Rufus to flash the images first, then I tried both images also with win32diskimager.
With RevPI Connect I have had no issues with the same power supply of 24V.
What could I do?
I have Core 3 and I wanted to flash new image. I tried two different raspbian lites (Buster 2019-07-10 and Strech 2018-11-13). With microUSB connected, Power LED is on and I can flash new image successfully. When I power down the Core 3 and remove microUSB and power back up, stays the Power LED off (and all the other LEDs as well, even ethernet). No video feed is displayed. I used Rufus to flash the images first, then I tried both images also with win32diskimager.
With RevPI Connect I have had no issues with the same power supply of 24V.
What could I do?