Page 1 of 1

Is it possible to interface the RevPi Connect and RevPi core with the 3 axis digital accelerometer and GPS & GNSS?

Posted: 27 Aug 2019, 07:52
by Anil
Hello everyone,

The Raspberry pi can be used along with the 3-axis digital accelerometer (ADXL345 -"https://www.analog.com/en/products/adxl ... t-overview") and also can use with(
RasPi GNSS-Aldebaran )-" http://drfasching.com/products/gnss/raspignss.html ". Is it possible to use the same extension modules along with the RevPi Connect and RevPi Core? With the following requirements
1. The whole system should work on the Battery power duration of 5 to 8 hours.
2. The field input resolution of 12bit.

Re: Is it possible to interface the RevPi Connect and RevPi core with the 3 axis digital accelerometer and GPS & GNSS?

Posted: 23 Sep 2019, 11:49
by dirk
Hi Anil, so this is what I can provide you by looking at the RevPi products: So just have a look at the data sheet of the AIO module if the specification fits your needs.