Hi guys
I would need some help regarding the flashing of the image to the Revolution Pi. I followed your steps but unfortunately there were errors 121 in the win32 disk imager. Is it safe to delete the boot files? I tried installing both jessie and stretch yet the problem still persist. I tried with different cables and also USB ports.
Flashing of Image
- Attachments
-
- Capture.PNG (87.24 KiB) Viewed 5233 times
Hi guys
Just for an update. I managed to solve the problem by using another software called Etcher and using a different Micro-Usb cable
Just for an update. I managed to solve the problem by using another software called Etcher and using a different Micro-Usb cable
Hello Shuthesh, could you share details with us? I did not yet had those problems with Win32 Disk Imager.
Hi Dirk,
Actually I also have no idea what went wrong. This is my 3rd time flashing the device and today is also my first time getting this error. I am not sure, the device storage was full and might have caused the problem. It can be also the micro USB cable or the USB port of the laptop based on my research.
Actually I also have no idea what went wrong. This is my 3rd time flashing the device and today is also my first time getting this error. I am not sure, the device storage was full and might have caused the problem. It can be also the micro USB cable or the USB port of the laptop based on my research.
