The Industrial Raspberry Pi Forum

Hello,

After some time I managed to take care of my RevPi again. Unfortunately, despite the detailed answer from Sven https://revolution.kunbus.de/forum/view ... 4280#p4280, my described problem has not been resolved . I will briefly describe my process of the installations carried out:

first installation wave:
0. Configuration: For reasons of our corporate network, I gave the RasPI a static IP address (eth0).
1st installation package: RasAp [url] https://github.com/billz/raspap-webgui [/ url] => for a WLAN access via mobile device to a WebGUI (Python web server)
2. Intsallationspaket: xrdp [url] http://www.gieseke-buch.de/raspberrypi/ ... op-steuern [/ url] => so I over our company network can access the RevPi via Windows Remote

RESULT:
RasAp worked
xrdp did not work because this package was able to access 127.0.0.1 (I think this port is already being used by RasAp)
Pictory did not work, the same problem with multiple port usage?? But Pictory uses the static IP of the RevPi and not the localhost 127.0.0.1.

second wave:
0. Uninstall RasAp
1. Installing xrdp

RESULT:
Pictory does not work. Error message: The page with static IP (192.xxx..) can not be called in the browser.

third wave :
0. Uninstall Pictory
1. Reinstallation of Pictory

RESULT:
Pictory does not work . Error message: The page with static IP(192.xxx..) can not be called.

Now I have no idea what I can do. I've also thought about doing a full reset for the revpi. I really want to avoid this task. Is it possible to use all three packages (WLAN, Remote and Pictory)? Most important, of course, is the reactivation of Pictory!

Thanks for the help and best regards
Hendrixon

Dear Hendrixon, what about a fresh start with the lastest image (currently Stretch 03/2019) ? Then install the tools step-by-step and have a look when an error occurs.