Bug: Modbus RTU Config disappears after Update to Stretch 06/2020

Topics about the Software of Revolution Pi
User avatar
RR4711
Posts: 229
Joined: 22 Feb 2018, 13:28

Re: Bug: Modbus RTU Config disappears after Update to Stretch 06/2020

Post by RR4711 »

Amar wrote: 04 Sep 2020, 15:05 Change version from 1.4.3 to 1.4.4 manually in config.rsc,if it is not already done.
Mine is still 1.4.2 so far. Will that make any difference?
User avatar
Amar
KUNBUS
Posts: 160
Joined: 15 Jul 2019, 12:58

Re: Bug: Modbus RTU Config disappears after Update to Stretch 06/2020

Post by Amar »

Yes,that shall make piCtory realise that the config.rsc is from current version.
Actually there is a fix in pictory (1.4.3-0) relating to Modbus RTU

* Fixed: Modbus Master RTU files had false multi length of 'Output Bit' value (48 instead of 32); fixed in RAP-Files (ModbusRTUMaster_20180122_1_1.rap, ModbusRTUMaster_20180406_1_2.rap)


If you create a new config and save it you shall see current pictory version being used.Use the same one in your config.rsc file.
There has been modification in ModbusRTU Master device json array in the piCtory versions and this needs to be updated
in the old config.rsc file as part of upgrade.
KUNBUS
User avatar
RR4711
Posts: 229
Joined: 22 Feb 2018, 13:28

Re: Bug: Modbus RTU Config disappears after Update to Stretch 06/2020

Post by RR4711 »

So I shall change it in my original OLD config from 1.4.2 to 1.4.4? Sorry I am a bit confused. You said I shall change it from 1.4.3 to 1.4.4 in the file with an editor. I said for me it says 1.4.2 in the config file. Shall I still change it from 1.4.2 to 1.4.4 by hand or will that break stuff?

Markus
User avatar
Amar
KUNBUS
Posts: 160
Joined: 15 Jul 2019, 12:58

Re: Bug: Modbus RTU Config disappears after Update to Stretch 06/2020

Post by Amar »

Sorry for the ambiguity. Create a new dummy config with piCtory (just say a connect device) and save it with some name. Check which version piCtory is saving that config.rsc.
Then change your original config.rsc by hand to the same version as that which is found in previous step.It might be version 1.4.3 or 1.4.4.
KUNBUS
Post Reply