Gateway schematics / Fieldbus

[jobijobi]

Hi,

Are the schematics available for the serial gateways?
Mainly interested in the Fieldbus Gateway.

The manual reads that Pin 1 is 5V fused, but can't find any info on how much current it can source, nor if the supply out is isolated.


Thanks

[dirk]

Hi jobijobi, unfortunately the Gateway Modules are not part of the open source products. The Gateway Modules existed before the beginning of RevPi as a separate product, here: https://www.kunbus.com/modular-gateways.html
I'll review the question about the isolation here and come back to you.

[dirk]

Hi, here is the info about isolation
Pin1 = 5V isolated
Pin4 = Gnd isolated
Imax = 100mA fused by a PTC