Currently the OUT LED on the AIO is steady red. On this page, https://revolution.kunbus.com/tutorials ... vpi-aio-2/ says, "Another fault. Check the output status in the process image".
How do I do this? If I use the piTest command line tool, what line do I type?
Thanks!
Steady RED Output LED on the AIO
Re: Steady RED Output LED on the AIO
When using Output Channel 1 of AIO,check following variables of AIO module in pictory. Click export.
File->Export-Offset list will give Text list with the names and byte/bit offsets of the values with export checkmark.
Output1Range (select required range)
Output1EnableSlew
Output1SlewStepSize
Output1SlewClock
OutputStatus_1 (Status Signals in Process Image RevPi AIO)
https://revolution.kunbus.com/tutorials ... revpi-aio/
OutputValue_1
read OutputStatus_1 with command:
piTest - r OutputStatus_1
File->Export-Offset list will give Text list with the names and byte/bit offsets of the values with export checkmark.
Output1Range (select required range)
Output1EnableSlew
Output1SlewStepSize
Output1SlewClock
OutputStatus_1 (Status Signals in Process Image RevPi AIO)
https://revolution.kunbus.com/tutorials ... revpi-aio/
OutputValue_1
read OutputStatus_1 with command:
piTest - r OutputStatus_1
KUNBUS