Module is present, but NOT CONFIGURED!!!
Module is present, but NOT CONFIGURED!!!
Hello,
I'm configuring a Revolution PI core with a RevPi DIO module. When I type the command piTest -d I get the following message:
Address: 0 module type: 95 (0x5f) RevPi Core
Module is present
input offset: 0 length: 1
output offset: 1 length: 1
Address: 31 module type: 96 (0x60) RevPi DIO
Module is present, but NOT CONFIGURED!!!
input offset: 2 length: 70
output offset: 72 length: 18
Address: 32 module type: 32864 (0x8060) RevPi DIO
Module is NOT present, data is NOT available!!!
input offset: 2 length: 70
output offset: 72 length: 18
Any documentation about how to configure this modules? Why I get two RevPi DIO modules If I only have one?
Thanks in advance
I'm configuring a Revolution PI core with a RevPi DIO module. When I type the command piTest -d I get the following message:
Address: 0 module type: 95 (0x5f) RevPi Core
Module is present
input offset: 0 length: 1
output offset: 1 length: 1
Address: 31 module type: 96 (0x60) RevPi DIO
Module is present, but NOT CONFIGURED!!!
input offset: 2 length: 70
output offset: 72 length: 18
Address: 32 module type: 32864 (0x8060) RevPi DIO
Module is NOT present, data is NOT available!!!
input offset: 2 length: 70
output offset: 72 length: 18
Any documentation about how to configure this modules? Why I get two RevPi DIO modules If I only have one?
Thanks in advance
Re: Module is present, but NOT CONFIGURED!!!
Hello JuspB,
you should check your Pictory configuration. I got the same message like u if i add another DIO in Pictory but not in real.
Delete the DIO, Save file, reset driver, maybe reboot the RevPi.
you should check your Pictory configuration. I got the same message like u if i add another DIO in Pictory but not in real.
Delete the DIO, Save file, reset driver, maybe reboot the RevPi.
Re: Module is present, but NOT CONFIGURED!!!
Thanks for your response benjamin!
I've tested what you are saying and the message is the same.
This is my PiCtory configuration
I've tested what you are saying and the message is the same.
This is my PiCtory configuration
Re: Module is present, but NOT CONFIGURED!!!
I solved it placing the module in the left side instead of the right side. I could change the PiBridge... But this is the final configuration:
- KarlZeilhofer
- Posts: 63
- Joined: 12 Mar 2017, 04:21
- Location: Oberösterreich, Pettenbach
- Contact:
Re: Module is present, but NOT CONFIGURED!!!
I had also this problem, as I have overlooked the save and reset instructions in the documentation.
- Attachments
-
- 2017-03-19_003.png (161.16 KiB) Viewed 11894 times
-
- Posts: 1
- Joined: 21 Jul 2020, 15:40
Re: Module is present, but NOT CONFIGURED!!!
Can anyone please help..
I saved and also did a Reset driver. It did not work. It is related to the versions not matching?
pi@RevPi12748:~ $ piTest -d
Found 3 devices:
Address: 0 module type: 95 (0x5f) RevPi Core V1.2
Module is present
input offset: 0 length: 6
output offset: 6 length: 5
Address: 31 module type: 97 (0x61) RevPi DI V1.4
Module is present, but NOT CONFIGURED!!!
input offset: 11 length: 70
output offset: 81 length: 18
Address: 32 module type: 32865 (0x8061) RevPi DI V0.0
Module is NOT present, data is NOT available!!!
input offset: 11 length: 70
output offset: 81 length: 18
I saved and also did a Reset driver. It did not work. It is related to the versions not matching?
pi@RevPi12748:~ $ piTest -d
Found 3 devices:
Address: 0 module type: 95 (0x5f) RevPi Core V1.2
Module is present
input offset: 0 length: 6
output offset: 6 length: 5
Address: 31 module type: 97 (0x61) RevPi DI V1.4
Module is present, but NOT CONFIGURED!!!
input offset: 11 length: 70
output offset: 81 length: 18
Address: 32 module type: 32865 (0x8061) RevPi DI V0.0
Module is NOT present, data is NOT available!!!
input offset: 11 length: 70
output offset: 81 length: 18
Re: Module is present, but NOT CONFIGURED!!!
Hi kartheek1512, please check that your PiCtory configuration concords to the actual positions of your modules. Then save and reset drive like @KarlZeilhofer mentioned.
-
- Posts: 2
- Joined: 17 Feb 2021, 10:03
Re: Module is present, but NOT CONFIGURED!!!
Hallo,
habe genau das gleiche Problem.
Habe die Konfiguration schon mal erfolgreich ausgeführt und Ein- und Ausgänge geschrieben/gelesen.
Habe aber aus div. Gründen das anfangs gemachte Basis-Image des ausgelieferten RevPi's wieder aufgespielt.
TrotzFile- SaveAs und Tool --> ResetDriver
Es bleibt bei:
pi@RevPi35654:~ $ piTest -d
Found 2 devices:
Address: 0 module type: 105 (0x69) RevPi Connect V1.0
Module is present
input offset: 0 length: 6
output offset: 6 length: 5
Address: 31 module type: 96 (0x60) RevPi DIO V1.4
Module is present, but NOT CONFIGURED!!!
input offset: 11 length: 70
output offset: 81 length: 18
An was kann das liegen? Wie bekomme ich alternativ das RepPi DIO konfiguriert?
Gruß
habe genau das gleiche Problem.
Habe die Konfiguration schon mal erfolgreich ausgeführt und Ein- und Ausgänge geschrieben/gelesen.
Habe aber aus div. Gründen das anfangs gemachte Basis-Image des ausgelieferten RevPi's wieder aufgespielt.
TrotzFile- SaveAs und Tool --> ResetDriver
Es bleibt bei:
pi@RevPi35654:~ $ piTest -d
Found 2 devices:
Address: 0 module type: 105 (0x69) RevPi Connect V1.0
Module is present
input offset: 0 length: 6
output offset: 6 length: 5
Address: 31 module type: 96 (0x60) RevPi DIO V1.4
Module is present, but NOT CONFIGURED!!!
input offset: 11 length: 70
output offset: 81 length: 18
An was kann das liegen? Wie bekomme ich alternativ das RepPi DIO konfiguriert?
Gruß