How do I stop the logi.rst control code

Für Themen rund um logi.RTS und logi.CAD 3
Post Reply
yushengzhou
Posts: 7
Joined: 17 Oct 2018, 09:29

How do I stop the logi.rst control code

Post by yushengzhou »

Dear all:
I can now control my RevPi O_1 with the logiCAD3 software to let the LED flash, But when I clicked "disconnect to PLC", the LED was still working.
How can I get him to stop working?
Now I find a way : log on to the web and Disable "Enable/Disable logic.rts" in services, But when I enabled "Enable/Disable logi.rts" LED continued working?
How do I stop him?
User avatar
Walter
Official 3rd Party Support logi.cals
Posts: 77
Joined: 15 Dec 2016, 12:56

Re: How do I stop the logi.rst control code

Post by Walter »

Hello,

PLCs are designed to work without a connected programming system.
You can stop the code by pressing the "STOP" button in the application view of logi.CAD 3
Removing the license will let the code run for 1 hour (demo mode).

kind regards
Walter
mirko.comparetti
Posts: 36
Joined: 04 Jun 2018, 11:01
Location: Lomazzo

Re: How do I stop the logi.rst control code

Post by mirko.comparetti »

You can also stop the logi-rts service from ssh

Code: Select all

sudo service logi-rts stop
Post Reply