Revolution Pi Connect+

Topics about the Hardware of Revolution Pi
Post Reply
parlov
Posts: 1
Joined: 12 May 2019, 22:40

Revolution Pi Connect+

Post by parlov »

Hallo,

I am interrested with the Revolution Pi Connect+. As the Flyer said, the Connect+ has 2 RJx45 socket. what i would like to ask is, is it possible to connect one Profinet-Interface to the Profinet-Network and the other to the office-Ethernet-network ?
Illustration as shown below (*took from this thread: https://revolution.kunbus.com/forum/vie ... 223f#p4623)

Image
Top
User avatar
dirk
KUNBUS
Posts: 2174
Joined: 15 Dec 2016, 13:19

Re: Revolution Pi Connect+

Post by dirk »

Dear parlov, yes exactly this is possible. The RevPi Connect is the answer to this question on how to separate the shop floor and the IT or Cloud network.
Top
Duelluxe
Posts: 5
Joined: 06 May 2021, 09:06

Re: Revolution Pi Connect+

Post by Duelluxe »

Is there a concrete example that shows how the corresponding interfaces must be configured?
How can the Profinet inputs be read out on Revpi Connect?
I am currently struggling with the fact that the Profinet interface on socket B of the RevPi Connect appears in the network.
Top
Post Reply

Return to “Hardware”