14 pin cable

[domotica]

Hi,

As we are finalizing our project and are looking for the best suited assembly procedure we are looking for a better solution for the almost 28 cables used on the DIO.
Is there any known cable on the market with the used 14 pin connector already fixed on it?
If no, are there any known adaptors we could use to achieve our goal.

thankx

[volker]

This is a Wieland product. We do not know any ready mounted cable assembly. the best way to deal with this connector is a cable with 10 mm end sleeves on the wires. As the connector is a push in type this reduces the effort to get the cable ends into the connector.